536994
35
Zoom out
Zoom in
Previous page
1/44
Next page
ALPINE MRV-M500/MRV-F300 68-21057Z96-B (EN/FR/ES) 35
17
1 For the “Speaker Level Input System setting,
connecting the Remote Turn-On Lead is
not required due to the “REMOTE SENSING”
function of this product. However, the
“REMOTE SENSING” function may not work
depending on the signal source connected. In
such a case, connect the Remote Turn-On Lead
to an incoming power supply cord (accessory
power) in the ACC position.
2 Use either RCA line level or speaker level
inputs. Do not connect both at the same time.
NOTE:
Only left/right channel speaker level input is required. However, all
speaker input leads (FL/FR/RL/RR) may be connected to prevent
zero output when the head unit fader is adjusted.
1 Pour le réglage « Système d’entrée de niveau
de haut-parleur », il nest pas nécessaire
de raccorder le fil de mise sous tension
télécommandée grâce à la fonction « REVEIL
AUTOMATIQUE » de ce produit. Il est
néanmoins possible que la fonction « REVEIL
AUTOMATIQUE » ne soit pas disponible en
fonction de la source du signal. Connecter
alors le conducteur de mise sous tension
télécommandée à un cordon d’alimentation
entrant (alimentation des accessoires) en
position ACC.
2 Utiliser les entrées de niveau de ligne RCA
ou de niveau de haut-parleur. Jamais les
connecter à la fois.
REMARQUE:
Seule l’entrée de niveau de haut-parleur du canal gauche/droit est
requise. Vous pouvez néanmoins raccorder tous les fils d’entrée de
haut-parleur (FL/FR/RL/RR) pour éviter l’absence de signaux lors
du réglage de l’équilibreur de l’unité principale.
1 Para el ajuste “Sistema de entrada de nivel
de altavoz”, no es necesario conectar el
cable de encendido debido a la función
“SENSOR REMOTO” de este producto. No
obstante, la función “SENSOR REMOTO” podría
no funcionar según la fuente de la señal
conectada. En ese caso, conecte el cable de
encendido remoto a un cable de alimentación
entrante (alimentación adicional) en la
posición ACC.
2 Utilice las entradas de nivel de altavoz o de
nivel de línea RCA. No conecte las dos al
mismo tiempo.
NOTA:
Solo se requiere entrada de nivel de altavoz de canal izquierdo/
derecho. No obstante, todos los cables de entrada de altavoz (FL/
FR/RL/RR) se pueden conectar para evitar la ausencia de entrada
cuando se ajuste el fader de la unidad principal.
z Y-Adaptor (Sold Separately)
1 RCA Extension Cable (Sold Separately)
2 Front Output
3 Rear Output
4 Subwoofer Output
5 Front Speakers
6 Rear Speakers
7 Subwoofer
8 Head Unit, etc.
z Adaptateur en forme de « Y » (vendu séparément)
1 Câble de rallonge RCA (vendu séparément)
2 Sortie avant
3 Sortie arrière
4 Sortie du haut-parleur de sous-graves
5 Haut-parleurs avant
6 Haut-parleurs arrière
7 Haut-parleur de sous-graves
8 Unité principale, etc.
z Adaptador en forma de Y” (vendido por separado)
1 Cable de extensión RCA (vendido por separado)
2 Salida delantera
3 Salida trasera
4 Salida del subwoofer
5 Altavoces delanteros
6
Altavoces traseros
7 Altavoz de frecuencias ultrabajas
8 Unidad principal, etc.
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alpine MRV-M500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alpine MRV-M500 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 1,19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info