65403
12
Zoom out
Zoom in
Previous page
1/24
Next page
12
Español
Français
English
16
Display
17
UP Button
18
DN (DOWN) Button
19
MODE Button
16
Affichage
17
Touche UP
18
Touche DN (DOWN)
19
Touche MODE
16
Visualización
17
Botón UP
18
Botón DN (DOWN)
19
Botón MODE
Remove the two hexagon screws holding the
top cover. Open the cover to operate the Mode
controls. When finished, close the top cover
and secure with the original hexagon screws.
Retirer les deux vis à tête hexagonale
maintenant le couvercle supérieur. Ouvrir le
couvercle pour utiliser les commandes de
Mode. Une fois terminé, fermer le couvercle
supérieur et le fixer avec les vis à tête
hexagonale dorigine.
Quite los dos tornillos hexagonales que
sostienen la cubierta superior. Abra la cubierta
para utilizar los controles de modo. Cuando
acabe los ajustes, cierre la cubierta superior
fíjela con los tornillos hexagonales originales.
16
19 18 17
OPERATION METHOD
SELECTING THE AMP ID
When multiple amplifiers are connected to an
Amplifier LINK compatible Head Unit, each amp
must have its own, unique ID.
With a single amplifier system, an AMP ID is not
necessary.
1. Press the MODE button until ID is displayed.
2. Select the AMP ID by pressing the DN/UP
button.
METHODE DE FONCTIONNEMENT
SELECTION DUN IDENTIFIANT DAMPLI
Lorsque les amplificateurs multiples sont connectés à
une unité principale compatible LINK amplificateur,
chaque ampli doit avoir son identifiant propre et unique.
Avec un système damplificateur unique, un identifiant
dampli nest pas nécessaire.
1. Appuyez sur la touche MODE jusqu’à ce que
« ID » saffiche.
2. Sélectionnez lidentifiant dampli en appuyant sur
la touche DN/UP .
MÉTODO DE OPERACIÓN
SELECCIÓN DEL ID DEL AMPLIFICADOR
Cuando estén conectados varios amplificadores a una
unidad principal compatible con al función de enlace
al amplificador (Amplifier-Link), cada amplificador
deberá tener su propio y único ID.
Con un sistema de un solo amplificador, no será
necesario ajustar un ID de amplificador.
1. Pulse el botón MODE hasta que se visualice ID.
2. Seleccione el ID del amplificador pulsando el
botón DN/UP .
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alpine MRV-F345 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alpine MRV-F345 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 0,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info