168568
10
Zoom out
Zoom in
Previous page
1/12
Next page
10
Español
Français
English
ESPECIFICACIONES
Salida de potencia: Potencia continua RMS (a 14,4V, de
20 Hz a 200 Hz)
Por canal en 4 ohmios (0,08% DAT) ..........150Wx1
Por canal en 2 ohmios (0,3% DAT) ............200Wx1
Potencia máxima total ....................................... 300W
Respuesta de frecuencia... 20 Hz a 200 Hz (+0, –3 dB)
Relación señal/ruido
(con referencia a la potencia nominal) ...... 100 dBA
Sensibilidad de entrada (para salida de potencia
nominal) ...... 200mV a 4,0V (1,0V en el punto central)
Impedancia de entrada ........................... 10k ohmios<
Impedancia de altavoz ............................ 4 o 2 ohmios
Filtro de paso bajo .................................... 50 a 200 Hz
Requisito de potencia .............................. 11 – 16V CC
con conexión negativa a tierra
Dimensiones (An. x Al. x Pr.) ... 230mm x 58mm x 230mm
Peso .................................................................. 2,6 kg
NOTA:
Con el propósito de introducir mejoras, las
especificaciones y el diseño del producto están sujetos
a cambios sin previo aviso.
SPECIFICATIONS
Sortie de puissance: Puissance continue RMS (à 14,4V,
20 Hz à 200 Hz)
Par canal à 2 ohms (0,08% DHT) ............... 150Wx1
Par canal à 2 ohms (0,3% DHT) ................. 200Wx1
Puissance max. totale ........................................ 300W
Réponse de fréquence ...... 20 Hz à 200 Hz (+0, –3 dB)
Rapport signal/bruit
(par rapport à la puissance nominale) ...... 100 dBA
Sensibilité d’entrée (pour la sortie de puissance
nominale) ....200mV à 4,0V (1,0V à la position centrale)
Impédance d’entrée ................................... 10k ohms<
Impédance de haut-parleur...................... 4 ou 2 ohms
Filtre passe-bas ........................................ 50 à 200 Hz
Alimentation nécessaire........................... 11 – 16V CC
à la terre négative
Dimensions (L x H x P) .....230mm x 58mm x 230mm
Poids .............................................2,6 kg (5 li. 12 on.)
REMARQUE:
Afin d'améliorer ce produit, les spécifications et la con-
ception sont sujettes à des modifications sans préavis.
SPECIFICATIONS
Power Output: RMS Continuous Power (at 14.4V, 20 Hz
to 200 Hz)
Per channel into 4 ohms (0.08% THD) ......150Wx1
Per channel into 2 ohms (0.3% THD) ........200Wx1
Total Max. Power ............................................... 300W
Frequency Response .......20 Hz to 200 Hz (+0, –3 dB)
Signal-to-Noise Ratio
(referenced to rated power)....................... 100 dBA
Input Sensitivity (for rated power
output) ............ 200mV to 4.0V (1.0V at center detent)
Input Impedance ....................................... 10k ohms<
Speaker Impedance ..................................4 or 2 ohms
Low Pass Filter ........................................50 to 200 Hz
Power Requirement .................................. 11 – 16VDC
Negative Ground
Dimensions (W x H x D) ....230mm x 58mm x 230mm
Weight ......................................... 2.6 kg (5 lbs. 12 oz)
NOTE:
For product improvement, specifications and design are
subject to change without notice.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alpine mrp m 200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alpine mrp m 200 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 0,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info