168543
13
Zoom out
Zoom in
Previous page
1/24
Next page
13
EspañolFrançais
English
TO DISPLAY THE CROSSOVER FREQUENCY
The Crossover Frequency, previously set with
the Crossover Frequency Adjustment Knob, can
be displayed.
1. Press the MODE button until Hz is displayed.
The Crossover Frequency is displayed.
TO DISPLAY THE SUBSONIC FILTER
The frequency set with the Subsonic Mode
Selector Switch can be displayed.
1. Press the MODE button until [Hz] is displayed.
2. Press the MODE button one more time.
HOW TO CHANGE THE DISPLAY
Voltage and temperature can be displayed.
1. Press the MODE button until V °C or °F is
displayed.
2. Press the DN/UP button to select the
display mode.
*SCAN:
Voltage, temperature (Celsius) and temperature
(Fahrenheit) values are displayed for 5 seconds
each and then repeated in a loop.
Voltage
(V)
Temperature
(Celsius, °C)
Temperature
(Fahrenheit, °F)
SCAN
*
POUR AFFICHER LA FREQUENCE DE RECOUVREMENT
La fréquence de recouvrement, réglée aupara-
vant avec la molette de réglage de fréquence de
recouvrement, peut être affichée.
1. Appuyez sur la touche MODE jusqu’à ce que
« Hz » saffiche.
La fréquence de recouvrement de est affichée.
POUR AFFICHER LE FILTRE SUBSONIQUE
La fréquence réglée avec le commutateur
sélecteur de mode subsonique peut être affichée.
1. Appuyez sur la touche MODE jusqu’à ce que [Hz]
saffiche.
2. Appuyez sur la touche MODE une fois de plus.
COMMENT CHANGER LAFFICHAGE
La tension et la température peuvent être
affichés.
1.
Appuyez sur la touche MODE jusqu’à ce que « V »
« °C » ou « °F » is displayed.
2. Appuyez sur la touche DN/UP button to
select the display mode.
*SCAN:
Les valeurs de tension, de température (Celsius)
et de température (Fahrenheit) sont affichées
pendant 5 secondes chacune puis répétées en
boucle.
VISUALIZACIÓN DE LA FRECUENCIA DE CRUCE
Es posible visualizar la frecuencia de cruce que
fue ajustada previamente con el botón de ajuste
de la frecuencia de cruce.
1. Pulse el botón MODE hasta que se visualice
Hz.
Se visualizará la frecuencia de cruce.
VISUALIZACIÓN DEL FILTRO SUBSÓNICO
La frecuencia ajustada con el interruptor selector
del modo subsónico se puede visualizar.
1. Pulse el botón MODE hasta que aparezca [Hz].
2. Pulse el botón MODE una vez más.
CÓMO CAMBIAR LA PANTALLA
Es posible visualizar la temperatura y el voltaje.
1. Pulse el botón hasta que se visualice V °C o
°F.
2. Pulse el botón DN/UP para seleccionar el
modo de visualización.
*SCAN:
Los valores de voltaje, temperatura (Celsius) y
temperatura (Fahrenheit) se visualizan durante 5
segundos cada uno y luego se repiten en un
ciclo.
Tension
(V)
Température
(Celsius, °C)
Température
(Fahrenheit, °F)
SCAN
*
Voltaje
(V)
Temperatura
(Celsius, °C)
Temperatura
(Fahrenheit, °F)
SCAN
*
<Display example> <Exemple daffichage> <Ejemplo de visualización>
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alpine mrd m 605 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alpine mrd m 605 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 0,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info