168543
9
Zoom out
Zoom in
Previous page
1/24
Next page
9
EspañolFrançais
English
HOW TO REMOVE OR ATTACH
THE TOP COVER
There are adjustment switches and buttons under the top
cover.
When adjusting, remove the top cover. After adjusting, it is
necessary to reattach the top cover to its former position.
Perform the operation by referring to the following
procedure.
1. To remove the top cover
1) Using the hexagonal wrench (M3), remove the two
hexagonal screws holding top cover in place.
2) While raising gently, remove the top cover.
2. To attach the top cover
1) Line up the two raised projections on the top cover
with the depressions on the main body.
2) Gently lower the top cover .
3) Attach the top cover with the two hexagonal screws
.
* Tighten the screws securely so that they do not
come loose due to vibrations while the vehicle is
moving.
NOTES:
Be sure to fasten the cover securely. Failure to do so may
lead to a malfunction.
The warranty is invalidated if the unit is used with the
cover open.
COMMENT RETIRER OU FIXER LE
COUVERCLE SUPERIEUR
Il y a des commutateurs et des touches de réglage sous le
couvercle supérieur.
Lors du réglage, retirer le couvercle supérieur. Après le
réglage, il est nécessaire de remettre le couvercle supérieur
dans sa position initiale.
Effectuer lopération en vous référant à la procédure qui
suit.
1. Pour retirer le capot supérieur
1) A laide dune clé hexagonale (M3), retirez les deux vis
hexagonales maintenant le capot supérieur en
place.
2) Retirer le capot supérieur en le soulevant doucement.
2. Pour fixer le capot supérieur
1) Alignez les projections saillantes du capot supérieur
avec les creux du corps principal.
2) Posez le capot supérieur doucement .
3) Fixez le capot supérieur avec les deux vis
hexagonales .
* Serrez fermement les vis de manière à ce quelles ne
se desserrent pas suite aux vibrations du véhicule
lorsque ce dernier est en mouvement.
REMARQUES:
Sassurer de fixer fermement le couvercle. Sinon, cela peut
conduire à un dysfonctionnement.
La garantie est annulée si lunité est utilisée avec le
couvercle ouvert.
CÓMO DESINSTALAR O INSTALAR
LA CUBIERTA SUPERIOR
Se encuentran interruptores de ajuste y botones debajo de
la cubierta superior.
Cuando realice el ajuste, extraiga el cubierta superior.
Después de finalizar el ajuste, es necesario volver a instalar
el cubierta superior en su posición anterior.
Realice la operación siguiendo el procedimiento siguiente.
1. Extracción de la cubierta superior
1) Utilizando una llave de tuercas hexagonal (M3), extraiga
los dos tornillos hexagonales que sostienen la
cubierta superior en su sitio.
2) Retire la cubierta superior, mientras la levanta con
cuidado.
2. Instalación de la cubierta superior
1) Alinee las dos proyecciones elevadas en la cubierta
superior con las cavidades localizadas en el aparato.
2) Baje con cuidado la cubierta superior .
3) Fije la cubierta superior con los dos tornillos
hexagonales .
* Apriete los tornillos firmemente, de forma tal que no
se aflojen debido a las vibraciones causadas durante
el movimiento del vehículo.
NOTAS:
No olvide asegurar la cubierta. De lo contrario esto puede
ocasionar un malfuncionamiento.
La garantía se anulará si la unidad se utiliza con la cubierta
abierta.
Fig. 11
Fig. 9
Fig. 10
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alpine mrd m 605 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alpine mrd m 605 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 0,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info