Manual Alpine MRA-F355 (page 4 of 16) (English, French, Spanish)

61475

Zoom out

Zoom in

1/16

EspañolFrançaisEnglish

INSTALLATION

En raison de la sortie de puissance élevée du MRA-

F355, une forte chaleur est produite pendant le fonc-

tionnement de l’amplificateur. Pour cette raison, l’am-

plificateur doit être monté dans un endroit permettant

une bonne ventilation, tel que le coffre. Pour ce qui

concerne les différentes positions d’installation, con-

tacter un concessionnaire Alpine.

1. Apposer l’amplificateur contre la surface d’installa-

tion pour marquer les repères des quatre vis.

2. Vérifier qu’il n’y a pas d’objets derrière la surface

pouvant être abîmés lorsque les trous soient per-

cés.

3. Percer les trous pour les vis.

4. Positionner le MRA-F355 par dessus les trous et

fixer avec les quatre vis auto-taraudées.

REMARQUE:

Pour connecter solidement le conducteur de mise à la

terre, utiliser la vis déjà fixée sur la partie métallique du

véhicule (signalée (})). Assurez-vous que ce point est

une bonne mise à la terre en vérifiant la continuité à la

borne de la batterie (–). Si possible, connecter tout l’équi-

pement au même point de mise à la terre. Ceci vous

aidera à éliminer le bruit.

1 Vis auto-taraudées (M4 x 20)

2 Conducteur de mise à la terre

3 Châssis

4 Trous

INSTALLATION

Due to the high power output of the MRA-F355, con-

siderable heat is produced when the amplifier is in op-

eration. For this reason, the amplifier should be

mounted in a location which will allow for free circula-

tion of air, such as inside the trunk. For alternate in-

stallation locations, please contact your authorized Al-

pine dealer.

1. Using the amplifier as a template, mark the four

screw locations.

2. Make sure there are no objects behind the surface

that may become damaged during drilling.

3. Drill the screw holes.

4. Position the MRA-F355 over the screw holes, and

secure with four self-tapping screws.

NOTE:

To securely connect the ground lead, use an already

installed screw on the metal part of the vehicle (marked

(})). Be sure this is a good ground by checking con-

tinuity to the battery (–) terminal. As much as possi-

ble connect all equipment to the same ground point.

These procedures will help eliminate noise.

1 Self-Tapping Screws (M4 x 20)

2 Ground Lead

3 Chassis

4 Holes

INSTALACIÓN

Debido a la salida de alta potencia del MRA-F355, se

produce un calor considerable cuando el amplificador

está en funcionamiento. Por esta razón, el amplifica-

dor deberá montarse en una ubicación que permita la

libre circulación de aire, como por ejemplo dentro del

maletero. Para ubicaciones de instalación alternativas,

por favor contacte a su distribuidor de Alpine autori-

zado.

1. Utilizando el amplificador como plantilla, marque

la ubicación de los cuatro tornillos.

2. Asegúrese de que no hay objeto alguno bajo la su-

perficie que pueda verse dañado durante la perfo-

ración de los agujeros.

3. Perfore los agujeros para los tornillos.

4. Sitúe el MRA-F355 sobre dichos agujeros, y ase-

gúrelo con cuatro tornillos autorroscantes.

NOTA:

Para conectar de forma segura el cable de tierra, utilice un

tornillo ya instalado en la parte metálica del vehículo (mar-

cado (})). Asegúrese de que es un punto de tierra bueno

verificando la continuidad con el terminal de la batería (–).

Conecte siempre que sea posible todo el equipo en el mis-

mo punto de tierra. Esto ayudará a eliminar el ruido.

1 Tornillos autorroscantes (M4 x 20)

2 Cable de tierra

3 Chasis

4 Agujeros

}

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Alpine MRA-F355 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 0,31 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Alpine MRA-F355 Manual

Product: