471402
8
Zoom out
Zoom in
Previous page
1/13
Next page
7-EN
ALPINE KCE-400BT 68-14470Z05-A (EN)
Adjusting the volume when
receiving a Call
While calling, you can adjust the volume. The adjusted
volume level is stored.
Turn the Rotary encoder or the Double
Action encoder to adjust the volume.
•You may need to increase volume from your regular audio
listening source level. However, increasing the volume
excessively may result in feedback. If feedback is noticed as
feedback is directly related to the volume, turn down the
volume as low as acceptable to eliminate it. Positioning the
microphone in a direction away from the main car speakers
(e.g. clipped on sun visor) may also reduce feedback at
high volume.
Redial Function
You can redial the person you have previously called.
After finishing a call, press or within 5
seconds.
The telephone is redialed.
Audio Switching Operation (CD Head
Unit Only)
While making a call, this function allows you to initiate the
transfer of the audio between the mobile phone and the
speakers in the car.
While calling, press and hold ENT for at least 2
seconds to switch the call sound between the
speakers in car and mobile phone.
Depending on the mobile phone, this operation may not be
performed.
Call History
Call History is recorded for the last dialed/received/missed
calls. There are various ways of making calls based on the
“Call History.” The following steps 1 to 4 are common to the
various ways of making these calls. For details, refer to each
individual category for making calls.
1
Press or .
The outgoing method list is displayed.
2
Turn the Rotary encoder or the Double
Action encoder to select the outgoing
mode.
Setting items : DIALED / RECEIVED / MISSED /
PHONE BOOK
DIALED : Dialed history
RECEIVED : Received history
MISSED : Missed incoming history
PHONE BOOK : Mobile phonebook
The adapter will update the information in the Call History
automatically each time a mobile phone is connected or
receiving/dialing a call. At this time, if you select any
outgoing mode, “UPDATING” will be displayed.
3
Press ENT.
The outgoing mode is activated, and each mode
list is displayed.
It may take some time for the list to be displayed, and also
directly after connection, the list may not be brought up to
date.
4
Turn the Rotary encoder or the Double
Action encoder to select a name or a
telephone number from the list.
5
Press ENT.
The selected telephone will be called.
If one name has several numbers registered in the
telephone book for CD Head Unit, press ENT after
selecting the name*, then turn the Rotary encoder
to choose the desired number and press ENT, the
telephone will be called. Press and hold ENT for at
least 2 seconds after selecting the name, the
default number of the name will be called.
Depending on the connected mobile phone, this
function may not be performed. (Only for CD Head
Unit)
* If the name cannot be recognized, default number will be
displayed.
If you place a call directly from the paired mobile phone,
the phone number is not displayed, you cannot redial from
the unit in this case.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alpine KCE-400BT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alpine KCE-400BT in the language / languages: English as an attachment in your email.

The manual is 0,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Alpine KCE-400BT

Alpine KCE-400BT Usermanual and installation guide - Dutch - 13 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info