661049

Alpine IVE-W560BT Manual

25
Zoom out
Zoom in
Previous page
1/96
Next page
25-EN
EN
The talker’s voice volume is low.
Increase the volume during a call.
The other party says that the volume is too low or high.
Adjust the [MIC Gain] level (page 17).
Echo or noise occurs during call conversations.
Reduce the volume.
If ambient noise other than the phone call sound is loud, try
reducing this noise.
Shut the window if road noise is loud.
Lower the air conditioner if the air conditioner is loud.
The phone sound quality is poor.
Phone sound quality depends on the reception
conditions of the mobile phone.
Move your car to a place where you can enhance the
mobile phone’s signal if the reception is poor.
The volume of the connected BLUETOOTH device is low
or high.
Volume level will differ depending on the BLUETOOTH
device.
Reduce the volume level differences between this unit
and the BLUETOOTH device (page 14).
The sound skips during audio streaming.
Reduce the distance between the unit and the
BLUETOOTH device.
If the BLUETOOTH device is stored in a case which
interrupts the signal, remove the case while using the
device.
Several BLUETOOTH devices or other devices which
emit radio waves are being used nearby.
Turn off the other devices.
Increase the distance between the unit and other
devices.
Playback sound stops momentarily when this unit is
connecting to a mobile phone. This is not a malfunction.
You cannot control the connected BLUETOOTH device
during audio streaming.
Check that the connected BLUETOOTH device supports
AVRCP.
Some functions do not work.
Check that the connecting device supports the functions
in question.
A call is answered unintentionally.
The connecting phone is set to start a call automatically.
[Auto Answer] of this unit is set to [ON] (page 17).
Pairing failed due to time out.
Depending on the connecting device, the time limit for
pairing may be short. Try completing the pairing within
the time by setting a single digit passkey.
The BLUETOOTH function cannot be operated.
Exit the source by pressing and holding SOURCE for
1 second, then turn on the unit.
No sound is output from the car speakers during a handsfree
call.
If the sound is output from the mobile phone, set the
mobile phone to output the sound from the car speakers.
Siri Eyes Free is not activated.
Perform the handsfree registration for an iPhone that
supports Siri Eyes Free.
Set the Siri function on the iPhone to on.
Cancel the BLUETOOTH connection with the iPhone and
the unit, and reconnect.
Error displays/messages
Bluetooth Connection Error
An error has occurred between this unit and the
BLUETOOTH phone.
Check the BLUETOOTH signal is set to on for this unit
or the BLUETOOTH phone.
Try pairing again.
Reconnect the BLUETOOTH phone.
Bluetooth device is not found.
The unit cannot detect a connectable BLUETOOTH
device.
Check the BLUETOOTH setting of the connecting
device.
No device is in the list of registered BLUETOOTH devices.
Perform pairing with a BLUETOOTH device (page 11).
Call Data Error
An error has occurred while accessing phonebook data
via PBAP or call history from the BLUETOOTH phone.
Reconnect the BLUETOOTH phone.
Data Listing Error
An error has occurred while displaying phonebook data
via PBAP or call history from the BLUETOOTH phone.
Reconnect the BLUETOOTH phone.
Disc Error
The unit cannot read the data due to a problem.
The data is damaged or corrupted.
The disc is corrupted.
The disc is incompatible with this unit.
The disc is not finalized.
The disc is dirty or inserted upside down.
Clean or insert the disc correctly.
A blank disc has been inserted.
The disc cannot play due to a problem.
Insert another disc.
The disc is not compatible with this unit.
Insert a compatible disc.
Press to remove the disc.
… 25 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alpine IVE-W560BT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alpine IVE-W560BT in the language / languages: English, German, French as an attachment in your email.

The manual is 1,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info