661049

Alpine IVE-W560BT Manual

19
Zoom out
Zoom in
Previous page
1/96
Next page
19-EN
EN
Steering Control
You can operate the unit with buttons on the steering wheel.
For safety, park your car before changing this setting.
Unit status: Any status
Option Purpose
Custom To display the instruction and panel for steering
wheel control.
Preset (
)
To deactivate steering wheel control.
To use rotary commander control.
User Defined
This setting is available only when [Steering Control] is set to [User].
The steering button panel appears.
1
Press and hold the button you want to assign to the steering
wheel. The button on the panel lights up (standby).
2
Press and hold the button on the steering wheel you want to
assign the function to. The button on the panel changes to blue
(registration complete).
3
To register other buttons, repeat steps
1
and
2
.
Unit status: Any status
Option Purpose
– To display the instruction and control panel.
Notes
If an error occurs while registering, all the registered information is
cleared. Restart registration from the beginning.
If the setting menu is left and settings are reconfigured, all
registered information are cleared and the registration process
starts from beginning.
This function may not be available on some vehicles.For details on
the compatibility of your vehicle, visit the support site on the back
page.
HOME Key Function (hold 2 sec push)
Unit status: Any status
Option Purpose
Voice, DSPL (
)
To assign the voice command function or the
display menu to the HOME button.
Bluetooth Connection
Unit status: Any status
Option Purpose
ON, OFF (
)
To activate the BLUETOOTH signal.
Bluetooth Device Info
Unit status: Any status
Option Purpose
– To display the device connecting to the unit by
touching [Open]. (Available only when [Bluetooth
Connection] is set to [ON].)
Bluetooth Reset
Unit status: Any status
Option Purpose
– To initialize all BLUETOOTH-related settings such
as pairing information, call history, preset dial,
history of connected BLUETOOTH devices, etc.
Sound Settings
Rear/Sub Out
Switches the audio output between the rear speakers and subwoofer.
Unit status: Any status
Option Purpose
Rear To output audio signals to the rear speakers
(amplifier).
Subwoofer ( )
To output audio signals to the subwoofer.
Sound Adjust
Selects 3 BAND EQ and adjusts subwoofer level, balance/fader level
or crossover filter.
Unit status: Any status
Option Purpose
3BAND EQ
Flat (
),
Pop,
Rock,
News,
Jazz,
Electronic,
Hip Hop,
Easy list.,
Country,
Classical
Custom
To select the equalizer curve; customize the
equalizer curve.When setting [Custom], selects
the equalizer settings: [Low], [Mid], [High].
Subwoofer:
(MUTE, –10 - +10)
: 0
To adjust the volume level of the subwoofer.
(Available only when [Rear/Sub Out] is set to
[Subwoofer].)
Balance:
(L 15 - 0 - R 15)
: 0
To adjust the sound balance between left and
right speakers.
Fader:
(Front 15 - 0 -
Rear 15)
: 0
To adjust the sound balance between front and
rear speakers.
HPF: 80 Hz,
100 Hz, 120 Hz,
140 Hz, 160 Hz,
OFF (
)
To select the cut-off frequency of the front/rear
speakers.
LPF: OFF (
),
80 Hz, 100 Hz,
120 Hz, 140 Hz,
160 Hz
To select the cut-off frequency of the subwoofer.
(Available only when [Rear/Sub Out] is set to
[Subwoofer].)
… 19 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alpine IVE-W560BT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alpine IVE-W560BT in the language / languages: English, German, French as an attachment in your email.

The manual is 1,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info