585129
38
Zoom out
Zoom in
Previous page
1/97
Next page
38-EN
Adjusting the Level
Touch [] or [] of “Level” to adjust the level of selected
band.
Setting contents: -7 to +7 (Initial setting: 0)
Setting the Bandwidth
Touch [] or [] of “Q Adjust” to select the bandwidth.
Setting contents: Wide (Initial setting) / Medium / Narrow
2
To adjust another band, repeat step 1, and adjust all
bands.
3
To store the adjusted setting value, touch and hold
[Preset1], [Preset2], or [Preset3] for at least 2
seconds.
Settings exceeding the frequency of adjacent bands are not available.
While adjusting the Parametric EQ, you should consider the
frequency response of the connected speakers.
When the Parametric EQ is adjusted, the adjustment for EQ Presets
becomes ineffective.
When EQ Presets is set, the interlinked Parametric EQ settings are
also changed. Band2 of Parametric EQ is also interlinked with the
Bass adjusted setting value, and Band8 is interlinked with the Treble
adjusted setting value. We recommend storing Parametric EQ
settings in the Preset in advance.
Touch [Flat] to initialise all values.
The Parametric EQ setting can be configured when Defeat is “Off.
Calling the Parametric EQ adjusted value
Calling the pre-set Parametric EQ adjusted value.
Touch [Preset1], [Preset2], or [Preset3] on the
Parametric EQ screen.
The setting stored in the Preset will be recalled.
Other Setting
[Other] is selected on the Sound setup menu in step 3. Refer to “Sound
Setup Operation” (page 33).
You can change the volume of the sound heard when a button is
touched.
Setting item: Volume Key Sound Feedback
Setting contents: 0 to 7 (Initial setting: 5)
Setting item:
Source Volume Setup Radio / DVD / CD /
Compress Media / iPod Music / iPod Video / AUX /
Bluetooth Audio
Setting contents: -14 to +14 (Initial setting: 0)
Settable source differ depending on the connected device and
settings.
You can set the rear speaker output to “Off.
Setting item: Rear Speaker
Setting contents: On (Initial setting) / Off
If an optional subwoofer is connected to the unit, make the following
setting.
Setting item: Subwoofer
Setting contents: On / Off (Initial setting)
The subwoofer output phase is toggled Subwoofer Normal (0°) or
Subwoofer Reverse (180°).
Setting item: Subwoofer Phase
Setting contents: 0° / 180° (Initial setting: 0°)
If the Subwoofer setting is “Off,” the setting cannot be set.
Setting Defeat
[Defeat] is selected on the Sound setup menu in step 3. Refer to “Sound
Setup Operation” (page 33).
If Defeat is “On,” MX, EQ Presets and Parametric EQ functions are
turned OFF. This disables any settings made for these functions.
Setting item: Defeat
Setting content: Off (Initial setting) / On
When Defeat is set to “On,” the Car Specific Sound Setup/MX
(Media Xpander)/EQ Presets/Parametric EQ switch cannot be
selected.
Defeat is changed to “Off” if you set BASS ENGINE SQ of Quick
Sound Setting to “On.
Volume Setting
Setting the Volume for Each Source
Rear Speaker Setting
Turning Subwoofer On/Off
Setting the Subwoofer Phase
38


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alpine INE-W990BT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alpine INE-W990BT in the language / languages: English as an attachment in your email.

The manual is 8,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Alpine INE-W990BT

Alpine INE-W990BT Installation Guide - English - 3 pages

Alpine INE-W990BT Installation Guide - German - 3 pages

Alpine INE-W990BT User Manual - German - 97 pages

Alpine INE-W990BT Installation Guide - Dutch - 3 pages

Alpine INE-W990BT User Manual - Dutch - 97 pages

Alpine INE-W990BT Quick start guide - All languages - 184 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info