536983
31
Zoom out
Zoom in
Previous page
1/107
Next page
31-EN
Display example for RDS Information
Displays the Radio text (When a Radio station that
transmits text messages)
RDS indicator
Turning AF (Alternative Frequencies) On
or Off
The RDS (Radio Data System) is a radio information system using the
57 kHz subcarrier of regular FM broadcasts. The RDS allows you to
receive a variety of information such as traffic information, station
names, and to automatically re-tune to a stronger transmitter that is
broadcasting the same programme.
1
Press the (AUDIO) button.
2
Touch [Radio] of Top banner.
The radio mode is activated and the display changes to the
Radio mode screen.
The display content varies depending on the last band selected.
(eg. [RadioFM1], etc.)
3
Touch [AF] of Bottom banner to select the AF
(Alternative Frequency) ON or OFF mode.
In AF ON mode, the “AF” Indicator lights up.
If [AF] is not displayed, touch [<<] in the bottom banner to
display [AF].
RDS mode is not be displayed for the MW or LW band.
When the AF ON mode is selected, the unit automatically tunes to a
strong signal station in the AF list.
Use the AF OFF mode when automatic re-tuning is not required.
Tips
If the unit receives the PTY31 (Emergency Broadcast) signal, the unit
will show “Alarm” in the display only when PTY31 is set to on. For
operation, refer to “Setting PTY31 (Emergency Broadcast)
Reception” (page 54).
The RDS digital data includes the following:
Refer to page 54 about “PI SEEK Setting,” “Receiving RDS
Regional (Local) Stations,” “Switching the Display Language of PTY
(Programme Type)” and “Setting PTY31 (Emergency Broadcast)
Reception.
Receiving Traffic Information
Touch [TA] of Bottom banner to turn on the Traffic
Information mode.
The TA indicator lights up.
When the traffic information station is tuned in, the TP indicator
lights up.
Traffic information is heard only when it is being broadcast. If
traffic information is not being broadcast, the unit is set in the
standby mode.
When a traffic information broadcast begins, the unit
automatically receives it and the display shows “T.Info.
When the traffic information broadcast is over, the unit will
automatically be set to the standby mode.
If the traffic information broadcast signal falls below a certain level,
the unit remains in the receiving mode for 1 minute. If the signal
remains below a certain level for over 70 seconds, “TA” will blink in
the display.
If you do not want to listen to traffic information being received,
touch [TA] to skip that traffic information message.
The T. Info mode will remain in the ON position to receive the next
traffic information message.
If the volume level is changed while receiving traffic information, the
changed volume level will be memorised. When traffic information is
received next time, the volume level will be automatically adjusted to
the level memorised.
If the Traffic Information mode is activated, the unit automatically
switches to radio source (even if you select another source) and
receives the traffic information broadcast. When the traffic
information is finished, the unit returns to the previous source.
RDS
Touch [<<], [>>]
PI Programme Identification
PS Programme Service Name
AF List of Alternative Frequencies
TP Traffic Programme
TA Traffic Announcement
PTY Programme Type
EON Enhanced Other Networks
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alpine INE-W928R at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alpine INE-W928R in the language / languages: English as an attachment in your email.

The manual is 8,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Alpine INE-W928R

Alpine INE-W928R Additional guide - English - 84 pages

Alpine INE-W928R Quick start guide - German - 22 pages

Alpine INE-W928R Additional guide - German - 94 pages

Alpine INE-W928R User Manual - German - 107 pages

Alpine INE-W928R Quick start guide - Dutch - 22 pages

Alpine INE-W928R Additional guide - Dutch - 92 pages

Alpine INE-W928R User Manual - Dutch - 107 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info