471437
19
Zoom out
Zoom in
Previous page
1/24
Next page
ALPINE HCE-C500 EN 68-18693Z84-A (A5)
17-EN
Installation and
Connections
Be sure to disconnect the cable from the (–) battery post
before installing your HCE-C500 series. This will reduce
any chance of damage to the unit in case of a short circuit.
Be sure to connect the colour coded leads according to
the diagram. Incorrect connections may cause the unit to
malfunction or damage to the vehicles electrical system.
When making connections to the vehicles electrical system,
be aware of the factory installed components (e.g. on-board
computer). Do not tap into these leads to provide power
for this unit. When connecting the HCE-C500 series to the
fuse box, make sure the fuse for the intended circuit of the
HCE-C500 series has the appropriate amperage. Failure to
do so may result in damage to the unit and/or the vehicle.
When in doubt, consult your Alpine dealer.
Route the cables and wiring away from hot or moving
parts, and fix them securely to avoid heat/mechanical
damage to the cable insulation, which may result in short-
circuit, fire or electric shock.
When fixing the control unit, camera, and alarm to the
vehicle with screws, attaching to weak spots may damage
vehicle parts.
If the camera is not mounted securely, shifting positions
will cause deterioration of detection performance.
The cable may break due to stress caused when opening
and closing the door/trunk of the vehicle.
If the control unit becomes wet, the electrical circuitry may
short out.
The camera is designed specifically for use with this
system. The system cannot be used with a different camera.
This product cannot be installed in or used with anything
other than a car (in other words, it cannot be used with
motorcycles, mobility vehicles, or electric wheelchairs or as
a household security camera, etc.).
CAUTION
An installation kit suitable for your vehicle
model is required to install this system.
Performance cannot be assured if you install
this system by any other means. Be sure to
check your type of vehicle before installing
the system.
Professional expertise and experience are
required to install this camera system. For
details of how to install and connect the
cameras, refer to the installation manual for
the vehicle installation kit (sold separately).
A special measuring kit is needed and
the system can only be calibrated by an
authorised ALPINE dealer. For details,
contact your ALPINE dealer.
Check Accessory Parts
Camera Control unit
Front camera x1
Rear camera x1
Side camera (L) x1
Side camera (R) x1
Power cable Camera cable
(for front/rear camera)
(Solderless connector)
Camera cable
(for side camera)
Camera junction cable
(for side camera)
(Including video output)
(x2 sets)
Front camera extension cable
(5.5m)
Rear camera extension cable
(8m)
Side camera (L) extension
cable (3.5m)
Side camera (R) extension
cable (3.5m)
Velcro fastener (Control unit) Self-Tapping screw
(Control unit)
(x4)
Wire clamp (large) Wire clamp (small)
(x10)
(x15)
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alpine HCE-C500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alpine HCE-C500 in the language / languages: English as an attachment in your email.

The manual is 1,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info