168536
43
Zoom out
Zoom in
Previous page
1/64
Next page
42-EN
Changer (Optional)
Controlling CD Changer (Optional)
An optional 6-disc or 12-disc CD Changer may be connected to this
unit if it is Ai-NET compatible. With a CD Changer connected to the
Ai-NET input of this unit, the CD Changer will be controllable from
this unit.
Using the KCA-400C (Multi-Changer Switching device) or the KCA-
410C (Versatile Link Terminal) multiple changers can be controlled
by this unit.
See “Multi-Changer Selection” on this page for selecting the CD
Changers.
The controls on this unit for CD Changer operation are operative
only when a CD Changer is connected.
The DVD changer (optional) is controllable from this unit as well
as the CD changer.
1
Press SOURCE/POWER to activate the CHANGER
mode.
The display shows the disc number and track number.
The source indicator varies depending on the connected source.
•Press BAND to switch the Disc mode in the Changer mode.
2
Press the disc select buttons (1 through 6)
corresponding to one of the discs loaded in the CD
Changer.
The selected disc number appears in the display and CD
playback starts.
After selecting the desired disc, you can operate in the same way as
for the CD player of this unit.
For details, please see the CD/MP3/WMA section.
If the “F” indicator is illuminated, the disc select buttons become
nonfunctional.
When a 12-disc CD Changer is connected:
To select discs numbered from 1 to 6, the procedure is the same
as for the 6-disc CD Changer. To select discs numbered from 7
to 12, first press F/SETUP to choose the disc select mode (7 to
12). This changes the “D” indicator to “d”. Then press the
desired select button. The select buttons 1 to 6 will represent
discs 7 to 12 respectively.
Playing MP3 Files with the CD Changer
(Optional)
If you connect a changer compatible with MP3, you can play CD-
ROMs, CD-Rs, and CD-RWs containing MP3 files on this unit.
1
Press SOURCE/POWER to switch to the MP3
Changer mode.
2
Press any one of the disc select buttons (1
through 6) corresponding to one of the discs
loaded in the CD Changer.
3
To pause playback, press -/J.
Pressing -/J again will resume playback.
The unit can play discs containing both audio data and MP3 data.
•For operating MP3 with an MP3 compatible CD Changer, refer to
“CD/MP3/WMA” pages 11 to 14.
Multi-Changer Selection (Optional)
Alpine's Ai-NET system will support up to 6 CD Changers. When
operating two or more changers, the KCA-400C (Multi-Changer
Switching device) must be used. If you use 1 Switching device, you
can connect up to 4 CD Changers. If you use 2 Switching devices,
you can connect up to 6 CD Changers. When using KCA-410C
(Versatile Link Terminal), you can connect two changers and two
external outputs (AUX).
1
Press SOURCE/POWER on this unit to activate
the CD Changer mode.
2
Press BAND to activate the CD Changer Selection
mode.
The CD Changer Selection mode remains active for
several seconds.
3
Press BAND until the desired CD Changer
indicator appears on the display.
If the selected CD Changer is not connected, the display will show
“NO CHGR.
•To operate the selected changer, see “CD/MP3/WMA” (page 11-
14).
•For further details about the external input (AUX) when using
KCA-410C, see “Setting the AUX Mode (V-Link)” on page 24.
SOURCE/
POWER
BAND
Select buttons
(1 through 6)
-/J
F/SETUP
43


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alpine dva 9860 r at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alpine dva 9860 r in the language / languages: English as an attachment in your email.

The manual is 1,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info