168536
25
Zoom out
Zoom in
Previous page
1/64
Next page
24-EN
Speakers
Front
left
Front
right
Rear
left
Rear
right
SPEAKER
RIGHT FRONT
SPEAKER
RIGHT REAR
SPEAKER
LEFT REAR
SPEAKER
LEFT FRONT
POWER IC ON : The speakers are driven by the built-in
amplifier.
No sound is produced by the system when the power output is set to
OFF.
Setting the Digital Output
OPT OUT ON / OPT OUT OFF (Initial setting)
To connect to a digitally to an audio processor, the optical digital
output must be turned ON.
Setting the Digital Audio Processor
H510 / OTHER (Initial setting)
According to the type of Ai-NET compatible digital audio processor
you are connecting, connect and change the setting as follows:
Make sure OPT OUT is ON in “Setting the Digital Output” (this
page) before switching this setting.
H510 : When connecting the PXA-H510, select the H510,
using the optical digital input connection to the
DVD.
OTHER : When connecting other than the PXA-H510, select
OTHER, and connect the optical digital input
terminal to the head unit.
After input selection is completed, turn the ignition off and back on
again. Setting of the optical digital input switch is completed.
Amplifier
Amplifier
Front
left
Front
right
Rear
left
Rear
right
External Device
Connecting an MP3 Changer
CDDA (Initial setting) / CDDA/MP3
Perform this setting when connecting MP3 changer. MP3 changer can
playback CDs containing both CD and MP3 data. However, in some
situations (some enhanced CDs), playback may be difficult. For these
special cases, you can select playback of CD data only. When a disc
contains both CD or the MP3 data, playback starts from the CD data
portion of the disc.
CDDA : Only CD data can be played back.
CDDA/MP3 : Both CD data and MP3 file tracks can be
played back.
Change discs after performing this setting.
Turning Mute Mode On/Off
MUTE ON (Initial setting) / MUTE OFF
If a device having the interrupt feature is connected, audio will be
automatically muted whenever the interrupt signal is received from
the device.
Setting the AUX Mode (V-Link)
AUX IN ON / AUX IN OFF (Initial setting)
You can input TV/video sound by connecting an optional Ai-NET/
RCA Interface cable (KCA-121B) or Versatile Link Terminal (KCA-
410C) to this component.
You can change the AUX name display when AUX ON is set. Select
the AUX name by pressing g or f. Then press BAND.
If the KCA-410C is connected, it is possible to select two AUX
names.
•Via KCA-410C, up to 2 external devices with RCA output can be
connected. In this case, press SOURCE/POWER to select AUX
mode and then press BAND to select your desired device.
Connecting to an External Amplifier
POWER IC ON (Initial setting) / POWER IC OFF
When an external amplifier is connected, sound quality can be
improved by stopping the power supply of the built-in amplifier.
POWER IC OFF : Use this mode when the front and rear pre-
amplifier of the unit are used to drive an
external amplifier connected to the
speakers. In this setting, the head unit’s
internal amplifier has no output to drive
speakers.
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alpine dva 9860 r at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alpine dva 9860 r in the language / languages: English as an attachment in your email.

The manual is 1,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info