168536
20
Zoom out
Zoom in
Previous page
1/64
Next page
19-EN
Sound Setting
Adjusting Bass/Treble/Balance (Between Left
and Right)/Fader (Between Front and Rear)/
Defeat
1
Press Rotary encoder (MODE/LOUD) repeatedly
to choose the desired mode.
Each press changes the modes as follows:
BASS TREBLE SUBWOOFER*
1
BALANCE FADER
DEFEAT VOLUME BASS
Bass Level: –7 ~ +10
Treble Level: –7 ~ +7
Subwoofer : 0 ~ +15
Balance : L15 ~ R15
Fader : R15 ~ F15
Defeat : ON/OFF
Volume : 0 ~ 35
If the Rotary encoder (MODE/LOUD) is not pressed within 5
seconds after selecting the BASS, TREBLE, BALANCE, FADER,
DEFEAT or SUBWOOFER mode, the unit automatically returns to
normal mode.
*
1
When the subwoofer mode is set to OFF, its level cannot be
adjusted.
2
Turn the Rotary encoder until the desired sound
is obtained in each mode.
By setting Defeat ON, previously adjusted settings of
BASS and TREBLE will return to the factory defaults.
Depending on the connected devices, some functions and display
indications do not work.
g
f
BAND
Rotary encoder
(MODE/LOUD)
CENTER f.
Setting the Bass Control
You can change the Bass Frequency emphasis to create your own
tonal preference.
Press CENTER f. to select the BASS (bass Center
frequency) control mode.
BASS TREBLE normal mode BASS
Setting the Bass Center Frequency
Press g or f to select the desired bass center
frequency.
60Hz 80Hz 100Hz 120Hz 60Hz
Emphasizes the displayed bass frequency ranges.
Setting the Bass Band width (Q-Factor)
Press BAND to select the desired bass band width.
Changes the boosted bass band width to wide or narrow.
A wide setting will boost a wide range of frequencies
above and below the centre frequency. A narrower setting
will boost only frequencies near the centre frequency.
Setting the Bass Level
Turn the Rotary encoder to select the desired bass
level (–7~+10).
You can emphasize or weaken the bass frequency.
If no operation is performed within 15 seconds, the bass control
setting will be turned off automatically.
The bass level settings will be individually memorized for each
source (FM, MW (LW), CD, etc.) until the setting is changed. The
bass frequency and bass band width settings adjusted for one
source are effective for all other sources (FM, MW (LW), CD etc.).
Depending on the connected devices, some functions and display
indications do not work. However, Bass Level is still adjustable if
an audio processor with the Bass function is connected.
This function is inoperable when DEFEAT is set to ON.
......................................
1 2 3 4
(Narrow)←→(Wide)
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alpine dva 9860 r at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alpine dva 9860 r in the language / languages: English as an attachment in your email.

The manual is 1,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info