168350
8
Zoom out
Zoom in
Previous page
1/22
Next page
6-EN
Selecting BBE Mode
The BBE (Barcus Berry Electronics) processor
installed in this unit is designed to correct the
phase distortion inherent in most loudspeaker
designs. Ensuring the phase integrity of the
signal driving the speakers improves the
accurate reproduction of the sound.
1 Press the BBE button to turn on the BBE mode.
Each press toggles between the BBE on and off
modes.
2 In BBE mode, press the BBE button for more
than 2 seconds to turn ON the BBE adjusting
mode.
To set the BBE adjusting mode to OFF, press the
BBE button for more than 2 seconds.
NOTE
In BBE adjusting mode, wait 5 seconds without
pressing any button. The BBE adjusting mode is turned
OFF.
3 To change to a desired BBE level, rotate the
MODE (Audio Control) knob.
The BBE level can be changed from +1 to +3.
NOTE
The initial mode is +2.
Setting Bass Frequency
The bass control centre frequency can be set at
60, 80, 100 or 200 Hz.
1 Press and hold the B.C. (Bass Control) button
for at least 3 seconds to turn on the bass control
settings.
2 Press the DN g or the f UP button to
select the desired Bass centre frequency.
Each press changes the centre frequency as
follows: 60 Hz, 80 Hz, 100 Hz and 200 Hz.
NOTE
If no buttons are pressed within 5 seconds, the bass
control settings will be turned off automatically.
3 Press the B.C. (Bass Control) button for more
than 3 seconds to turn off the bass control
settings.
NOTE
Initial mode is 80Hz.
Changing Display Pattern of Audio
Level
1 Press the DISP button to turn the OLI ON.
The display pattern (Level indicator) will change.
Level indicator
OLI ON:
The level indicator bars light up from the left side
to the right side repeatedly in accordance with
the musical signals.
Press the DISP button again to turn the OLI OFF.
The indicator displays the volume level.
Basic Operation
MODE
BBE
B.C.DN g
f UP
DISP
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alpine cdm 7861 r at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alpine cdm 7861 r in the language / languages: English as an attachment in your email.

The manual is 0,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info