572051
33
Zoom out
Zoom in
Previous page
1/52
Next page
33-EN
* Depending on the iOS version, you may need to turn on the
Bluetooth function manually on the iPod/iPhone side, then
perform this step.
4
If pairing is successful, “CONNECTED” is displayed for a
few seconds. The head unit then returns to its previous
state.
Notes
If the device has been paired with this unit previously, it will not USB
Pair automatically.
If the connection is unsuccessful, “FAILED” is displayed.
After a successful pairing, the device and this unit should connect
automatically whenever the vehicles ignition is turned ON. If the auto
reconnect fails, try to connect manually.
Set “VISIBLE M” to ON, so this unit is visible to other Bluetooth
compatible devices. Refer to “Setting the Visible Mode” on page 34.
Bluetooth SETUP
The following steps 1 to 5 are common to the various Bluetooth
functions. For details, refer to each individual function.
Note
Set BT IN to ON, and then perform Bluetooth SETUP operation. Refer
to “Setting the Bluetooth Connection (BT IN)” on page 33.
1
Press and hold YSETUP for at least 2 seconds to
activate the SETUP mode.
2
Turn the Rotary encoder to select “Bluetooth”, and then
press ENTER.
The Bluetooth setup mode is activated.
3
Turn the Rotary encoder to select the desired items, and
then press ENTER.
Bluetooth:
BT IN
*1
USB PAIR PAIRE D DEV VISIBLE M
CALL SOUND CALLER ID PB UPDATE
*1
PB ORDER
SPEAKER SL
*2
FW VERSION FW UPDATE
*1
BT IN
*1 The items are not displayed during a phone call.
*2 If you switch the 2WAY/3WAY system (page 24) to 3WAY
mode, you cannot adjust this item.
4
Turn the Rotary encoder to change the settings.
5
Press and hold YSETUP for at least 2 seconds.
The SETUP mode is cancelled.
Notes
•Press t to return to the previous mode.
If no operation is performed for 60 seconds, the unit will return to
normal mode automatically.
With Bluetooth technology, you can place a hands-free call by a
Bluetooth-equipped Smartphone.
Audio information of a Bluetooth compatible Smartphone, a portable
audio player, etc., is controllable/playable wirelessly from this unit.
Setting item: BT IN
Setting contents:
OFF / ON (Initial setting)
OFF:
Hands-Free Phone function and Bluetooth Audio function are
disabled.
ON:
Select when you want to pair your Bluetooth compatible phone
with this unit or use Bluetooth Audio function.
Note
When BT IN is set to OFF, the indicators related to Hands-free phone
(C battery charge and i signal strength) will not be displayed.
By setting this item to ON, the unit will auto pair when an iPod/iPhone
is connected to this unit via the USB port.
Setting item: USB PAIR
Setting contents:
OFF / ON (Initial setting)
OFF:
Turn off the auto pair function.
ON:
Auto pair when an iPod/iPhone is connected to this unit via the
USB port.
Note
USB Auto-Pairing cannot take place if either device has been paired
previously. Make sure the device name of both has been deleted
from each device.
Select one of 5 connected Bluetooth compatible devices that you
previously registered.
Setting item: PAIRED DE V
1
Turn the Rotary encoder to select a Bluetooth compatible
device you want to use (you want to change connection),
and then press ENTER.
2
Turn the Rotary encoder to select “CONNECT” to connect
the selected device.
The connected device is marked withl. Select “DISCONNECT”
to disconnect this device. Select “CLEAR” when you want to clear
the device from the device list.
Notes
If the connection is successfully changed, “CONNECTED” is displayed
for 2 seconds and the indicator lights up, then the display returns to
the SETUP screen.
If a Smartphone is connected to this unit successfully, the C indicator
lights up to show the battery charge of the connected Smartphone. The
X indicator lights up when the battery charge is about 50%, the Z
indicator lights up when the battery charge is not enough, and it blinks
as a low level warning. The Z indicator goes out when the battery is
drained. At this time, the Bluetooth function is unavailable due to the
Smartphone powered off.
•Indicator i (Signal Strength):
The indicator will display the current signal strength of your service
provider. The I indicator blinks when the signal of the connected
Smartphone is very weak. The I indicator goes out when the
Smartphone is not in service area or receives no signal.
Depending on the connected Smartphone, the C (battery charge),
and i (signal strength) indicators may not be displayed.
A total of 5 devices can be registered. If a 6th device is registered, the
earliest registered device will be deleted automatically.
Setting the Bluetooth Connection
(BT IN)
Setting the Auto Pairing with iPod/iPhone
Setting the Bluetooth Device
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alpine CDE-W296BT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alpine CDE-W296BT in the language / languages: English as an attachment in your email.

The manual is 4,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Alpine CDE-W296BT

Alpine CDE-W296BT Quick start guide - English, German - 132 pages

Alpine CDE-W296BT User Manual - German - 57 pages

Alpine CDE-W296BT Quick start guide - Dutch - 132 pages

Alpine CDE-W296BT User Manual - Dutch - 57 pages

Alpine CDE-W296BT Quick start guide - French, Italian, Polish, Swedish, Spanish - 132 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info