660388
28
Zoom out
Zoom in
Previous page
1/50
Next page
28-EN
Setting the stay on mode
You can set the delay in turning OFF the unit’s power after the vehicles
ignition is turned off (ACC OFF). When you select a mode other than
OFF, the music will be paused after you turn the ignition key off (ACC
OFF). At the same time, the prompt “PRESS PRESET 6 TO STAY ON”
will scroll once. Press 6 within 15 seconds to continue enjoying music
for the selected period. If 6 is not pressed, the unit will power off within
15 seconds. During this period, you can only receive a call by operating a
paired Smartphone.
Setting item: STAY ON
Setting contents:
OFF (Initial setting) / 5 MIN / 15 MIN / 30 MIN
Note
Note that there is a possibility that the battery may be drained if already
weak, during this period.
Demonstration
This unit will enter a demonstration mode to display its various
functions.
Setting item: DEMO MODE
Setting contents:
ON (Initial setting) / OFF / QUITE OFF
ON:
The unit starts the demonstration if there is no operation for 30
seconds.
OFF (Standby):
The demonstration mode is in the standby state. Note that if this
unit is disconnected from the vehicle’s battery, the next time you
use this unit the demonstration mode will be ON.
QUITE OFF (Completely closed):
Close the demonstration mode completely.
Setting Adaptive Steering Remote Control
This unit is compatible with the adaptive steering remote control.
This function allows operation by sending the steering remote control
signal to the unit.
To use the steering remote control, perform the following button
operations after setting to ON and pressing ENTER.
For details, consult your nearest Alpine dealer.
Setting item: STEERING
Setting contents:
OFF (Initial setting) / ON
1
Select the assigned function by turning the Rotary
encoder.
(e.g. Select SOURCE)
POWER SOURCE BAND VOL UP VOL DOWN PAUSE
MUTE BWD FWD P UP P DOWN OFF HOOK
ON HOOK VOICE CTRL
2
Press the steering remote control button until the
changed signal value of steering remote control appears
in the left of the display.
(e.g. Press SOURCE of the steering remote control button.)
The changed steering remote control signal appears in the left
of the display.
3
Press ENTER to execute the setting value.
The confirmed signal value of steering remote control appears in
the right of the display. With doing so, the function of the unit is
assigned to the steering remote control button.
4
Repeat steps 1 to 3, and set each button.
When settings have been completed, press t to return to the
previous mode.
Setting the Opening Screen Update
You can customize the units Opening Screen as following steps.
Setting item: OPENING
Setting contents:
UPDATE NO (Initial setting) / UPDATE YES
1
Create a new Text file in USB memory (preferably in the
root directory) via PC.
It’s better to remove all other files from the USB memory.
2
Rename the Text file with the desired displaying font
(maximum 10 bits), and change its suffix to “.bin”.
(For example: SOUND HU.bin)
3
Switch this unit to USB source, then select “OPENING”
“UPDATE YES” in SETUP, and then press ENTER.
4
Insert the USB memory into this unit.
After a successful update “UPDATED” will be displayed.
Notes
Turn the ignition key to off and on to validate this setting.
Please create Text file in English/Chinese or Japanese system.
For non-supported characters, the display is blank.
SOURCE
FF
FF
SOURCE
FF
DE
The changed signal value of steering remote control
SOURCE
DE
DE
The conrmed signal value of steering remote control
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alpine CDE-193BT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alpine CDE-193BT in the language / languages: English as an attachment in your email.

The manual is 4,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Alpine CDE-193BT

Alpine CDE-193BT Quick start guide - English - 124 pages

Alpine CDE-193BT User Manual - German - 55 pages

Alpine CDE-193BT Quick start guide - German, Dutch - 124 pages

Alpine CDE-193BT User Manual - Dutch - 54 pages

Alpine CDE-193BT Quick start guide - French - 124 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info