536896

Alpine CDE-182R Manual

20
Zoom out
Zoom in
Previous page
1/34
Next page
20-EN
Option Menu Setting
You can quickly adjust the setting items relevant to the current SOURCE
by using Option Menu.
1
Press and hold ENTER/OPTION for at least 2 seconds
to activate the Option menu of the current source.
Note
• The option menu varies depending on the source.
2
Turn the Rotary encoder to select the desired setting
item, and then press ENTER.
3
Turn the Rotary encoder to change the setting, and then
press ENTER.
After the setting, the display will return to the current source
automatically.
The following setting items are displayed when MENU LANG is
set to ENGLISH. For details, refer to “Setting the Menu Language”
on page 21.
Setting item:
TUNER mode:
TUNER SET
*1
SOURCE VOL
*2
DIMMER
*3
DISC mode (CDE-182R/CDE-181 Series/CDE-180 Series only):
CD SET
*4
SOURCE VOL
*2
DIMMER
*3
USB mode:
SOURCE VOL
*2
DIMMER
*3
iPod mode (CDE-182R/CDE-181 Series only):
APP DIRECT
*5
iPod SET
*6
SOURCE VOL
*2
DIMMER
*3
AUX mode:
AUX SET
*7
SOURCE VOL
*2
DIMMER
*3
*1 The setting items are the same as TUNER setting in SETUP
mode. For details, refer to “SETUP” on page 20.
*2 You can individually emphasise or weaken the volume level
of the current source to create your own tonal preference. The
setting values in Option mode and in SETUP mode are
linkage. Refer to “Setting the Source Volume Level” on
page 16.
*3 Refer to “Dimmer Control” on page 21.
*4 PLAY MODE can be selected in this mode. For details, refer
to “Playing MP3/WMA/AAC Data (PLAY MODE)
(CDE-182R/CDE-181 Series/CDE-180 Series only)” on
page 21.
*5 Refer to “Setting the iPod Control” on page 23.
*6 The setting items are the same as iPod setting in SETUP
mode. For details, refer to “iPod/iPhone Setting” on page 22.
*7 AUX NAME can be selected in this mode. For details, refer to
“Setting the AUX NAME mode” on page 21.
Notes
•Press r to return to the previous mode.
• Pressing and holding r for at least 2 seconds will return to normal
mode.
• If no operation is performed for 60 seconds, the unit will return to
normal mode automatically.
Setting
You can flexibly customize the unit to suit your own preferences and
usage. From the SETUP menu, GENERAL Setting, DISPLAY Setting,
etc., can be modified.
1
Press and hold AUDIOSETUP for at least 2 seconds to
activate the SETUP mode.
2
Turn the Rotary encoder to select the desired item, and
then press ENTER.
(e.g. Select GENERAL)
AUDIO
*1
GENERAL DISPLAY TUNER iPod
*2
GENERAL:
MENU LANG AUX SETUP
*3
AUX NAME
*4
PLAY MODE
*5
DEMO MODE
DISPLAY:
DIMMER TEXTSCROLL
TUNER:
AF
*6
REGIONAL
*7
PI SEEK
*8
iPod:
iPod LIST
*1 Refer to “Audio Setup” on page 15.
*2 CDE-182R/CDE-181 Series only.
*3 Not displayed when the current source is AUXILIARY.
*4 Displayed only when AUX SETUP is set to ON.
*5 CDE-182R/CDE-181 Series/CDE-180 Series only.
*6 Refer to “Turning AF (Alternative Frequencies) ON/OFF” on
page 10.
*7 Refer to “Receiving RDS Regional (Local) Stations” on page 11.
*8 Refer to “PI SEEK Setting” on page 11.
3
Turn the Rotary encoder to select a setting item, and then
press ENTER.
(e.g. Select AUX SETUP)
4
Turn the Rotary encoder to change the setting, and then
press ENTER.
(e.g. Select AUX ON or AUX OFF)
5
Press and hold AUDIOSETUP for at least 2 seconds to
return to normal mode.
SETUP
Use steps 1 to 5 to select one of the SETUP modes to modify.
See the applicable section below for details about the
selected SETUP item.
AUDIO/SETUP
SOURCE/
/ENTER
Rotary encoder
… 20 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alpine CDE-182R at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alpine CDE-182R in the language / languages: English as an attachment in your email.

The manual is 2,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Alpine CDE-182R

Alpine CDE-182R Quick start guide - English - 76 pages

Alpine CDE-182R User Manual - German - 35 pages

Alpine CDE-182R Quick start guide - German, Dutch - 76 pages

Alpine CDE-182R User Manual - Dutch - 35 pages

Alpine CDE-182R Quick start guide - French, Italian, Polish, Swedish, Spanish - 76 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info