536896
23
Zoom out
Zoom in
Previous page
1/76
Next page
21
01.05CDE182R-QRG.fm
ALPINE CDE-182R 68-24567Z14-A (EN/DE/FR)
Lorsque vous raccordez les fils au système électrique du
véhicule, faites attention aux composants installés en
usine (par exemple, microprocesseur). Ne pas essayer
d’alimenter l’appareil en le raccordant aux fils de ces
appareils. Lorsque vous raccordez les modèles
CDE-182R/CDE-181, les modèles CDE-180 ou le modèle
UTE-81R au boîtier à fusible, assurez-vous que le fusible
du circuit désigné pour les modèles CDE-182R/CDE-181,
les modèles CDE-180 ou le modèle UTE-81R possède
l’ampérage approprié. Dans le cas contraire, vous
risquez d’endommager l’appareil et/ou le véhicule. En
cas de doute, consultez votre revendeur Alpine.
L’unité principale doit être fixée à moins de 35 degrés du
plan horizontal, de l’arrière vers l’avant.
1
* Si la gaine de montage installée n’épouse pas bien la
forme du tableau de bord, vous pouvez plier légèrement
les plaques de compression pour remédier au problème.
Moins de 35°
Support
Boulon à six
pans
(fourni)
Cet appareil
Plaques de compression*
Capuchon de
caoutchouc (fourni)
Gaine de
montage
(fournie)
Tableau de
bord
Wenn Sie Anschlüsse an das elektrische System des
Fahrzeugs vornehmen, berücksichtigen Sie bitte alle
werksseitig bereits installierten Komponenten (z. B. Bord-
Computer). Zapfen Sie nicht die Leitungen solcher
Komponenten an, um dieses Gerät mit Strom zu versorgen.
Wenn Sie das CDE-182R/Modellreihe CDE-181/
Modellreihe CDE-180/UTE-81R an den Sicherungskasten
anschließen, achten Sie darauf, dass die Sicherung für den
Stromkreis, an den Sie das CDE-182R/Modellreihe
CDE-181/Modellreihe CDE-180/UTE-81R anschließen
wollen, einen geeigneten Ampere-Wert aufweist.
Andernfalls kann es zu Schäden am Gerät und/oder am
Fahrzeug kommen. Wenden Sie sich im Zweifelsfall bitte
an Ihren Alpine- Händler.
Der Einbauwinkel des Gerätes sollte weniger als 35 Grad
betragen.
1
* Wenn der angebrachte Einbaurahmen lose im
Armaturenbrett sitzt, können die Druckplatten leicht
gebogen werden, um das Problem zu beheben.
Weniger als 35°
Halterung
Sechskant-
Stiftschraube
(beiliegend)
Dieses Gerät
Druckplatten*
Armaturenbrett
Einbaurahmen
(beiliegend)
Gummikappe
(beiliegend)
When making connections to the vehicles electrical
system, be aware of the factory installed components (e.g.
on-board computer). Do not tap into these leads to
provide power for this unit. When connecting the
CDE-182R/CDE-181 Series/CDE-180 Series/UTE-81R to
the fuse box, make sure the fuse for the intended circuit of
the CDE-182R/CDE-181 Series/CDE-180 Series/
UTE-81R has the appropriate amperage. Failure to do so
may result in damage to the unit and/or the vehicle. When
in doubt, consult your Alpine dealer.
The main unit must be mounted within 35 degrees of the
horizontal plane, back to front.
1
* If the installed mounting sleeve is loose in the dashboard,
the pressure plates may be bent slightly to remedy the
problem.
Installation
Less than 35°
Bracket
Hex Bolt
(Included)
This unit
Pressure Plates*
Rubber Cap
(Included)
Mounting
Sleeve
(Included)
Dashboard
01.00CDE182R-QRG.book Page 21 Monday, August 26, 2013 9:49 AM
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alpine CDE-182R at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alpine CDE-182R in the language / languages: English, German, Dutch, French, Italian, Polish, Swedish, Spanish as an attachment in your email.

The manual is 9,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Alpine CDE-182R

Alpine CDE-182R User Manual - English - 34 pages

Alpine CDE-182R User Manual - German - 35 pages

Alpine CDE-182R User Manual - Dutch - 35 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info