536908
13
Zoom out
Zoom in
Previous page
1/53
Next page
13-EN
Receiving RDS Regional (Local) Stations
1
Press and hold AUDIO/SETUP for at least 2 seconds to
activate the SETUP mode.
2
Turn the Rotary encoder to select the Tuner mode, and
then press ENTER.
3
Turn the Rotary encoder to select RDS Regional, and then
press ENTER.
4
Turn the Rotary encoder to select ON or OFF.
In the OFF mode, the unit automatically keeps receiving the
related local RDS station.
5
Press and hold AUDIO/SETUP for at least 2 seconds to
return to normal mode.
Notes
Pressing r during the procedure will return to the previous mode.
If no operation is performed for 60 seconds in the SETUP mode, the
setting mode is cancelled.
PI SEEK Setting
1
Press and hold AUDIO/SETUP for at least 2 seconds to
activate the SETUP mode.
2
Turn the Rotary encoder to select the Tuner mode, and
then press ENTER.
3
Turn the Rotary encoder to select PI Seek, and then press
ENTER.
4
Turn the Rotary encoder to select ON or OFF.
5
Press and hold AUDIO/SETUP for at least 2 seconds to
return to normal mode.
Notes
Pressing r during the procedure will return to the previous mode.
If no operation is performed for 60 seconds in the SETUP mode, the
setting mode is cancelled.
Receiving Traffic Information
1
Press and hold BANDTA for at least 2 seconds so that the
“TA” indicator lights up.
2
Press or to select your desired traffic information
station.
When a traffic information station is tuned in, the “TP” indicator
lights up.
Traffic information is heard only when it is being broadcast. If
traffic information is not being broadcast, the unit is set in the
standby mode. When a traffic information broadcast begins, the
unit automatically receives it and the display shows “T.INFO”.
When the traffic information broadcast is over, the unit will
automatically set in the standby mode.
Notes
If the traffic information broadcast signal falls below a certain level, the
unit remains in the receiving mode for 1 minute. If the signal remains
below a certain level for over 1 minute, the “TA” indicator blinks.
If you do not want to listen to the traffic information being received,
lightly press or to skip that traffic information message. The
TA mode will remain in the ON position to receive the next traffic
information message.
If the volume level is changed while receiving traffic information, the
changed volume level will be memorized. When traffic information is
received next time, the volume level will be automatically adjusted to
the level memorized.
In the TA mode, the SEEK tuning selects only the TP stations.
PTY (Programme Type) Tuning
1
Press and hold ENTEROPTION for at least 2 seconds
to activate the Option menu while the unit is in Radio (FM
receiving) mode.
2
Turn the Rotary encoder to select the PTY Select, then
press ENTER.
The Programme Type of the station being currently received will
be displayed for 5 seconds.
If there is no receivable PTY broadcast, “No PTY” will be
displayed for 5 seconds.
If no RDS station can be received, the display shows “No PTY”.
3
Turn the Rotary encoder to choose the desired
programme type while the PTY (programme type) is being
displayed.
4
Press ENTER after selecting the programme type to
start searching for a station in the selected programme
type.
The chosen programme type display blinks during searching
and lights when a station is found.
If no PTY station is found, “No PTY” will be displayed for
5seconds.
5
Press and hold ENTEROPTION for at least 2 seconds
to return to normal mode.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alpine CDE-175R at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alpine CDE-175R in the language / languages: English as an attachment in your email.

The manual is 4,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Alpine CDE-175R

Alpine CDE-175R Quick start guide - English, German - 112 pages

Alpine CDE-175R User Manual - German - 58 pages

Alpine CDE-175R Quick start guide - Dutch - 112 pages

Alpine CDE-175R User Manual - Dutch - 58 pages

Alpine CDE-175R Quick start guide - French, Italian, Polish, Swedish, Spanish - 112 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info