536908
10
Zoom out
Zoom in
Previous page
1/53
Next page
10-EN
Initial System Start-Up
Be sure to press the RESET switch when using the unit for the first time,
after changing the car battery, etc.
1
Turn off the unit power.
2
Press y (OPEN) to open the front panel, and then remove
it.
3
Press RESET with a ballpoint pen or similar pointed object.
Adjusting Volume
Turn the Rotary encoder until the desired sound is
obtained.
Lowering Volume Quickly
Activating the Audio Mute function will instantly lower the volume level
by 20 dB.
1
Press MUTE to activate the MUTE mode.
The audio level will decrease by about 20 dB.
2
Pressing MUTE again will bring the audio back to its
previous level.
Setting the Time and Calendar
1
Press and hold AUDIO/SETUP for at least 2 seconds to
activate the SETUP selection mode.
2
Turn the Rotary encoder to select the General mode, and
then press ENTER.
Audio General Display Tuner iPod&USB
Application Bluetooth
*
Audio
* CDE-178BT/iDE-178BT only.
3
Turn the Rotary encoder to select Clock Adjust, and then
press ENTER.
4
Turn the Rotary encoder to set year.
5
Press ENTER.
6
Repeat steps 4 and 5 above to set month, date, hour and
minute.
7
Press and hold AUDIO/SETUP for at least 2 seconds to
return to normal mode.
Notes
•Pressing r returns to the previous SETUP mode.
If no operation is performed for 60 seconds, SETUP is cancelled.
To synchronise the clock to another clock/watch or radio time
announcement, press and hold ENTER for at least 2 seconds after
setting the “hour”. Minutes will reset to 00. If the display shows over
“30” minutes when you do this, the time will advance one hour.
Even when Auto Clock is set to ON (refer to “Setting the Time to
automatically be adjusted” on page 27), the time can be adjusted
manually. At the same time, if there is an adjustment request from RDS,
the time will be adjusted automatically by RDS data.
RESET switch
Controllable with Remote Control
This unit can be controlled with an optional Alpine remote control.
For details, consult your Alpine dealer. Point the optional remote
control transmitter at the remote-control sensor.
Connectable to Remote Control Interface Box
With an optional Alpine Steering Wheel Remote Control Interface
Box (not included), this unit is controllable from the vehicles
steering wheel controls. For details, contact your Alpine dealer.
Remote control sensor
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alpine CDE-175R at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alpine CDE-175R in the language / languages: English as an attachment in your email.

The manual is 4,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Alpine CDE-175R

Alpine CDE-175R Quick start guide - English, German - 112 pages

Alpine CDE-175R User Manual - German - 58 pages

Alpine CDE-175R Quick start guide - Dutch - 112 pages

Alpine CDE-175R User Manual - Dutch - 58 pages

Alpine CDE-175R Quick start guide - French, Italian, Polish, Swedish, Spanish - 112 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info