471374
13
Zoom out
Zoom in
Previous page
1/41
Next page
13-EN
5
Press and hold AUDIOSETUP for at least 2 seconds to
return to normal mode.
Notes
•Press to return to the previous mode.
Pressing and holding for at least 2 seconds will return to normal
mode.
If no operation is performed for 60 seconds, the unit will return to
normal mode automatically.
Receiving Traffic Information
1
Press and hold BANDTA for at least 2 seconds so that the
“TA” indicator lights up.
2
Press or to select your desired traffic information
station.
When a traffic information station is tuned in, the “TP” indicator
lights up.
Traffic information is heard only when it is being broadcast. If
traffic information is not being broadcast, the unit is set in the
standby mode. When a traffic information broadcast begins, the
unit automatically receives it and mute the audio source (CD, FM
radio, USB AUDIO, etc.). The display shows “TRF-INFO” for 2
seconds.
When the traffic information broadcast is over, the unit will
automatically set in the standby mode.
Notes
If you do not want to listen to the traffic information being received,
lightly press BANDTA to skip that traffic information message. The TA
mode will remain in the ON position to receive the next traffic
information message.
If the volume level is changed while receiving traffic information, the
changed volume level will be memorized. When traffic information is
received next time, the volume level will be automatically adjusted to
the level memorized.
In the TA mode, the SEEK tuning selects only the TP stations.
Displaying Radio Text
Text messages from a radio station can be displayed.
Press VIEW while receiving FM in the radio mode to select
the Radio Text display.
The display will change every time the button is pressed.
If there is PS (Programme Service Name):
PS (Programme Service Name)
*
RADIO TEXT CLOCK PS
(Programme Service Name)
* If VIEW is pressed and held for at least 2 seconds while
displaying PS in the radio mode, frequency will be displayed for
5 seconds.
If there is no PS (Programme Service Name):
FREQUENCY RADIO TEXT CLOCK FREQUENCY
The display shows “WAITING” for a few seconds, then starts
scrolling the text message.
Note
If there is no receivable text message or the unit cannot receive a text
message properly, the display shows “NO TEXT”.
Playback
1
Insert a disc with the label side facing up.
The disc will be pulled into the unit automatically.
Note
When a disc is already inserted, press SOURCE to switch to the
DISC mode.
2
While playing back MP3, press 1 or 2 to select the
desired folder.
Pressing and holding 1 or 2 will change folders continuously.
3
Press or to select the desired track (file).
Pressing and holding or will fast backward/fast
forward track continuously.
4
To pause playback, press .
Pressing again will resume playback.
5
To eject the disc, press .
Notes
Do not remove a CD during its eject cycle. Do not load more than one
disc at a time. A malfunction may result from doing either.
•The” indicator lights up when a disc is inserted.
Three-inch (8 cm) CDs can not be used.
Any file protected by DRM (Digital Rights Management) copy
protection, cannot be played back on this unit.
The track display for MP3 data playback is the file numbers recorded on
the disc.
The playback time may not be correctly displayed when a VBR
(Variable Bit Rate) recorded file is played back.
During CD/MP3 playback, press , and then you can quickly return
to the hierarchy level selected last time in the search mode.
CD/MP3
SOURCE/
Rotary encoder
/ENTER
1
2
4 5
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alpine CDE-133BT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alpine CDE-133BT in the language / languages: English as an attachment in your email.

The manual is 3,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Alpine CDE-133BT

Alpine CDE-133BT User Manual - German - 46 pages

Alpine CDE-133BT Usermanual and installation guide - Dutch - 46 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info