471376
23
Zoom out
Zoom in
Previous page
1/35
Next page
24-EN
Voice Dial Operation
You can call the telephone by performing voice operation.
1
Press and hold VOICE DIAL for at least 2 seconds.
The speak mode is activated, and “SPEAK” is displayed.
2
Say the telephone number, name you want to call into the
microphone.
Notes
You can perform this operation only when a voice dial compatible
mobile phone is connected. If the mobile phone is not compatible with
the voice dial, “NO SUPPORT” is displayed for 2 seconds.
The Voice Dial function performance depends on the recognition range
of the mobile phone and mounting location of the microphone. Please
pay attention when the microphone is mounted.
Voice dial operation depends on the function of the mobile phone. For
details, refer to the Owner’s Manual of the mobile phone.
If a called person that you say is not found, “NO CALL” is displayed for
2 seconds.
If you place a call via voice dial, you cannot display a phone number or
name.
Adjusting the volume when receiving a Call
While calling, you can adjust the volume.
Turn the Rotary encoder to adjust the volume.
Note
You may need to increase volume from your regular audio listening
source level. However, increasing the volume excessively may result in
feedback. If feedback is noticed as feedback is directly related to the
volume, turn down the volume as low as acceptable to eliminate it.
Positioning the microphone in a direction away from the main car
speakers (e.g. clipped on sun visor) may also reduce feedback at high
volume.
Call Switching Operation
While making a call, this function allows you to initiate the transfer of
the audio between the mobile phone and the speakers in the car.
While calling, press and hold ENT for at least
2 seconds to switch the call sound between the unit and
mobile phone.
Note
Depending on the mobile phone, this operation may not be performed.
Playing MP3/WMA/AAC Files with the USB
Memory (optional)
If you connect a USB memory containing MP3/WMA/AAC, the
following table shows which type of files can be played on which models.
1
Press SOURCE to switch to the USB AUDIO mode.
2
To pause playback, press ENT.
Pressing ENT again will resume the playback.
Notes
The root folder is displayed as “ROOT” in the Folder Name Search
mode.
When a search is made in the USB mode, any song being played back
will be stopped.
This unit plays back files in the USB Memory with the same controls
and modes as playback of CDs containing MP3/WMA/AAC. For
details, refer to “CD/MP3/WMA/AAC” on page 12.
Before disconnecting USB Memory, be sure to change to another source
or set to pause.
The playback time may not be correctly displayed when a VBR
(Variable Bit Rate) recorded file is played back.
USB Memory Connection (optional)
1
Open the cover of the USB Connection Terminal.
USB Memory (optional)
MP3 WMA AAC
CDE-126BT 
CDE-125BT
Connect USB Memory
SOURCE/
/ENT
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alpine CDE-126BT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alpine CDE-126BT in the language / languages: English as an attachment in your email.

The manual is 3,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Alpine CDE-126BT

Alpine CDE-126BT User Manual - German - 38 pages

Alpine CDE-126BT Usermanual and installation guide - Dutch - 38 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info