471385
9
Zoom out
Zoom in
Previous page
1/37
Next page
7-EN
3
Press RESET with a ballpoint pen or similar pointed object.
Adjusting Volume
1
Turn the Rotary encoder until the desired sound is
obtained.
Setting the Dimmer Control (CDE-112Ri/
CDE-113BT/CDE-114BTi only)
1
Press FUNC.SETUP so that the indicator lights up.
2
Press 6DIMMER repeatedly to select the DIMMER mode.
DIMMER-A (Auto mode) DIMMER ON DIMMER OFF
DIMMER-A
DIMMER-A mode:
Decrease the illumination brightness of the unit with the head
lights of the vehicle ON. This mode is useful if you feel the units
backlighting is too bright at night.
DIMMER ON mode:
Keep the illumination brightness of the unit dark.
DIMMER OFF mode:
Keep the illumination brightness of the unit bright.
3
Press FUNC.SETUP to activate the normal mode.
The indicator goes out.
Notes
Operate the unit while the indicator lights up. If no operation is
performed for 10 seconds, the indicator goes out.
The function is inoperable when the ILLUMINATI is set to other than
TYPE1 for CDE-112Ri/CDE-113BT, refer to “Changing Lighting
Colour (CDE-112Ri/CDE-113BT only)” on page 17.
* The illustrator is for CDE-114BTi.
Listening to Radio
1
Press SOURCE to select TUNER mode.
2
Press BANDTA repeatedly until the desired radio band is
displayed.
F1 (FM1) F2 (FM2) F3 (FM3) MW LW F1 (FM1)
3
Press TUNEA.ME to select the tuning mode.
DX SEEK (Distance mode) SEEK (Local mode) OFF (Manual
mode) DX SEEK
Note
The initial mode is Distance mode.
Distance mode:
Both strong and weak stations will be automatically tuned in
(Automatic Seek Tuning).
Local mode:
Only strong stations will be automatically tuned in (Automatic
Seek Tuning).
Manual mode:
The frequency is manually tuned in steps (Manual tuning).
4
Press or to tune in the desired station.
Holding down or will change the frequency
continuously.
Presetting Stations Manually
1
While receiving the station that you want to store, press
and hold, for at least 2 seconds, any one of the preset
buttons (1 through 6) into which you wish to store the
station.
The display shows the band, preset number and station
frequency memorised.
Notes
A total of 30 stations can be stored in the preset memory (6 stations for
each band; FM1, FM2, FM3, MW and LW).
If you store a station in a preset memory which already has a station,
the current station will be cleared and replaced with the new station.
If the indicator is illuminated, turn off the indicator by pressing
FUNC.SETUP, and then you can perform the operation.
RESET switch
Radio
BAND/TA
SOURCE/
FUNC./SETUP
TUNE/A.ME

Preset buttons
(1 through 6)
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alpine CDE-111RM at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alpine CDE-111RM in the language / languages: English as an attachment in your email.

The manual is 2,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Alpine CDE-111RM

Alpine CDE-111RM User Manual - Dutch - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info