471312

Alpine CDE-111R Manual

24
Zoom out
Zoom in
Previous page
1/37
Next page
22-EN
You can redial the person you have previously called.
1
After finishing a call “----------” will be displayed, press
within 5 seconds.
The telephone is redialed.
Note
• If you receive a call from an unknown number, you cannot use the
redial function to call back.
Call History is recorded for the last dialed/received/missed calls. There
are various ways of making calls based on the “Calling”. The following
steps 1 to 5 are common to the various ways of making these calls. For
details, refer to each individual category for making calls.
1
Press .
The outgoing method list is displayed.
2
Turn the Rotary encoder to select the outgoing mode.
Setting item: Outgoing Mode
Setting contents:
DIALED / RECEIVED / MISSED / PHONE BOOK
DIALED:
Dialed history
RECEIVED:
Received history
MISSED:
Missed incoming history
PHONE BOOK:
Mobile phonebook
3
Press ENT.
The outgoing mode is activated, and each mode list is displayed.
Note
• It may take some time for the list to be displayed, and also directly after
connection, the list may not be brought up to date.
4
Turn the Rotary encoder to select a name or a telephone
number from the list.
Note
• The names of PHONE BOOK are listed alphabetically with the same
beginning alphabetical character, and can be skipped to the next
alphabetical character by pressing 1AF or 2.
e.g. press 2 to the section beginning with alphabet B from A.
5
Press ENT.
The selected telephone will be called.
If one name has several numbers registered in the telephone
book, press ENT after selecting the name
*
, then turn the
Rotary encoder to choose the desired number and press
ENT, the telephone will be called. Press and hold
ENT for at least 2 seconds after selecting the name, the
default number of the name will be called. Depending on the
connected mobile phone, this function may not be performed.
* If the name cannot be recognized, default number will be
displayed.
Notes
• The names registered in the telephone book are displayed. If the name
is not registered, a number is displayed. If both name and number
cannot be displayed, “ID UNSENT” will be displayed.
• If you place a call directly from the paired mobile phone, the phone
number is not displayed, you cannot redial from the unit in this case.
Redialing a Number In Outgoing History
Previously dialed telephone numbers are stored in dialed calls history.
You can redial a number by searching from dialed calls history.
Setting item: DIALED
Dialing a Number In Incoming History
Telephone numbers from received calls are stored in the Received List.
You can redial these numbers by searching here.
Setting item: RECEIVED
Dialing a Number In Incoming Missed Call
History
Telephone numbers for received calls that are missed, are stored in the
Missed List. You can redial these numbers by searching here.
Setting item: MISSED
Dialing a Number In The Phone Book
Up to 1,000 telephone numbers are downloadable from a mobile phone.
Dial a call by selecting a person from the phone book list.
Setting item: PHONE BOOK
Notes
• If a name cannot be obtained via the phonebook, “----------” is
displayed.
• The order of the list display depends on the design of the mobile phone.
• If the call history or phonebook of the mobile phone is added or deleted
while it is connected to the unit, the list displayed on the unit may not
be brought up to date. If it is not updated, you cannot correctly place a
call.
Voice Dial Operation
You can call the telephone by performing voice operation.
1
Press and hold VOICE DIAL for at least 2 seconds.
The speak mode is activated, and “SPEAK” is displayed.
2
Say the telephone number, name you want to call into the
microphone.
Notes
• You can perform this operation only when a voice dial compatible
mobile phone is connected. If the mobile phone is not compatible with
the voice dial, “NO SUPPORT” is displayed for 2 seconds.
• The Voice Dial function performance depends on the recognition range
of the mobile phone and mounting location of the microphone. Please
pay attention when the microphone is mounted.
• Voice dial operation depends on the function of the mobile phone. For
details, refer to the Owner’s Manual of the mobile phone.
• If a called person that you say is not found, “NO CALL” is displayed for
2 seconds.
• If you place a call via voice dial, you cannot display a phone number or
name.
Adjusting the volume when receiving a Call
While calling, you can adjust the volume.
1
Turn the Rotary encoder to adjust the volume.
Redial Function
Calling
… 24 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alpine CDE-111R at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alpine CDE-111R in the language / languages: English as an attachment in your email.

The manual is 2,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Alpine CDE-111R

Alpine CDE-111R User Manual - German - 41 pages

Alpine CDE-111R User Manual - Dutch - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info