60768
36
Zoom out
Zoom in
Previous page
1/39
Next page
34-EN
Installation
The main unit must be mounted within 35 degrees of the horizontal
plane, back to front.
Caution
When you install this unit in your car, do not remove the
detachable front panel.
If the detachable front panel is removed during installation, you
might press too hard and warp the metal plate that holds it in
place.
1
* If the installed mounting sleeve is loose in the dashboard, the
pressure plates may be bent slightly to remedy the problem.
Remove the mounting sleeve from the main unit
(see “Removal” on page 35). Slide the mounting
sleeve into the dashboard and fix it with the metal
shackles.
Detachable Front
Panel
Less than 35°
Mounting Sleeve
(Included)
Rubber Cap (Included)
This unit
Pressure Plates
*
Bracket
Hex Bolt
(Included)
Dashboard
2
When your vehicle has the Bracket, mount the long
hex bolt onto the rear panel of the CDE-101R/
CDE-101RM/CDE-102Ri/CDE-103BT/CDE-104BTi and
put the Rubber Cap on the hex bolt. If your vehicle
does not have the Mounting Support, reinforce the
head unit with the metal mounting strap (not
supplied). Connect all the leads of the CDE-101R/
CDE-101RM/CDE-102Ri/CDE-103BT/CDE-104BTi
according to details described in the CONNECTIONS
section.
For the screw*, provide a proper screw to the chassis installing
location.
3
Slide the CDE-101R/CDE-101RM/CDE-102Ri/
CDE-103BT/CDE-104BTi into the dashboard. When
the unit is in place, make sure the locking pins are
fully seated in the down position. This can be done
by pressing firmly in on the unit while pushing the
locking pin down with a small screwdriver. This
ensures that the unit is properly locked and will not
accidentally come out from the dashboard. Install
the detachable front panel.
Metal Mounting Strap
Hex Nut (M5)
Bolt Stud
Screw
This unit
Lock Pin
36


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alpine CDE-104BTI at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alpine CDE-104BTI in the language / languages: English as an attachment in your email.

The manual is 1,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Alpine CDE-104BTI

Alpine CDE-104BTI User Manual - German - 39 pages

Alpine CDE-104BTI User Manual - Dutch - 39 pages

Alpine CDE-104BTI User Manual - French - 39 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info