60768
25
Zoom out
Zoom in
Previous page
1/39
Next page
23-EN
Hands-Free Phone Control
Hands-free calls are possible when using a HSP (Head Set Profile) and
HFP (Hands-Free Profile) compatible mobile phone with this unit.
Avoid performing a hands-free call in heavy traffic or on narrow or
winding streets.
Close the windows while calling to reduce background noise.
If both calling parties are using hands-free devices, or the call is
made in a noisy location, difficulty hearing the other person’s voice
is normal.
Depending on telephone line conditions or certain mobile devices
used, voices may sound unnatural.
When using a microphone, speak as directly as you can into the
microphone to pick up the best sound quality.
Certain mobile phone features are dependent on the capabilities and
settings of your service provider’s network. Additionally, certain
features may not be activated by your service provider, and/or the
provider’s network settings may limit the feature’s functionality.
Always contact your service provider about feature availability and
functionality.
All features, functionality, and other product specifications, as well
as the information contained in the Owner’s Manual are based upon
the latest available information and are believed to be accurate at
the time of printing.
Alpine reserves the right to change or modify any information or
specifications without notice or obligation.
Incoming calls are announced by the received call ring tone and a
displayed message (PHONE).
Press .
The call starts.
When “Setting the Received Calls automatically (Auto Answer)
(page 22) is set to AT ANS ON, you can receive a call automatically.
While calling, the source sound on the unit is muted. After calling,
playback will resume.
Press and hold for at least 2 seconds.
The call finishes.
While receiving you can also hang up by pressing and holding for
at least 2 seconds.
You can redial the person you have previously called.
After finishing a call “----------” will be displayed, press
within 5 seconds.
The telephone is redialed.
If you receive a call from an unknown number, you cannot use the
redial function to call back.
Call History is recorded for the last dialed/received/missed calls. There
are various ways of making calls based on the “Calling”. The following
steps 1 to 5 are common to the various ways of making these calls. For
details, refer to each individual category for making calls.
1
Press .
The outgoing method list is displayed.
2
Turn the Rotary encoder to select the outgoing
mode.
3
Press / /ENT.
The outgoing mode is activated, and each mode list is
displayed.
It may take some time for the list to be displayed, and also directly
after connection, the list may not be brought up to date.
4
Turn the Rotary encoder to select a name or a
telephone number from the list.
The names of PHONE BOOK are listed alphabetically with the same
beginning alphabetical character, and can be skipped to the next
alphabetical character by pressing 1
/AF or 2.
e.g. press 2 to the section beginning with alphabet B from A.
5
Press / /ENT.
The selected telephone will be called.
If one name has several numbers registered in the telephone
book, press
/ /ENT after selecting the name*, then turn the
Rotary encoder to choose the desired number and press
/ /ENT, the telephone will be called. Press and hold
/ /ENT for at least 2 seconds after selecting the name, the
default number of the name will be called. Depending on the
connected mobile phone, this function may not be performed.
* If the name cannot be recognized, default number will be displayed.
The names registered in the telephone book are displayed. If the
name is not registered, a number is displayed. If both name and
number cannot be displayed, “ID UNSENT” will be displayed.
If you place a call directly from the paired mobile phone, the phone
number is not displayed, you cannot redial from the unit in this case.
Redialing a Number In Outgoing History
Previously dialed telephone numbers are stored in dialed calls history.
You can redial a number by searching from dialed calls history.
Setting item: DIALED
Dialing a Number In Incoming History
Telephone numbers from received calls are stored in the Received List.
You can redial these numbers by searching here.
Setting item: RECEIVED
Dialing a Number In Incoming Missed Call History
Telephone numbers for received calls that are missed, are stored in the
Missed List. You can redial these numbers by searching here.
Setting item: MISSED
About the Hands-Free Phone
Answering a Call
Hanging up the Telephone
Redial Function
Calling
Setting items : DIALED / RECEIVED / MISSED / PHONE
BOOK
DIALED : Dialed history
RECEIVED : Received history
MISSED : Missed incoming history
PHONE BOOK : Mobile phonebook
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alpine CDE-104BTI at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alpine CDE-104BTI in the language / languages: English as an attachment in your email.

The manual is 1,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Alpine CDE-104BTI

Alpine CDE-104BTI User Manual - German - 39 pages

Alpine CDE-104BTI User Manual - Dutch - 39 pages

Alpine CDE-104BTI User Manual - French - 39 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info