168577

Alpine cda 7878 r Manual

35
Zoom out
Zoom in
Previous page
1/48
Next page
33-EN
3WAY
F/R/Sub-W
Adjusting the Time Correction
9 Press the BAND button to select the channel to
be adjusted.
2 way system
3 way system
∗ Press the MODE button to switch to the Cut-off
frequency/Slope Adjusting mode.
10
Rotate the Audio Control knob to adjust the
value of the Time Correction (0.0 - 20.0).
11
To
adjust another channel, repeat the steps 9 to 10.
12
When all the adjustments are completed, press
and hold the DIVIDER button for at least 2
seconds to cancel the Adjusting mode.
Storing the adjustments
You can store the adjustments.
13
Press and hold the MODE button for at least 2
seconds to store the settings (Or press the 1 or 2
button).
The display flashes.
14
While the display is flashing, press the 1 or 2
button.
The divider and the Time correction settings are
stored.
15
Press the DIVIDER button to return to normal
mode.
NOTES
• About the 2 way/3 way system
You can switch to 2way/3 way system mode with the 2
way/3 way switch on the side of the unit. (See on page
45)
When setting to “3 WAY”:
The unit can be operated in 3-way
system.
When setting to “F/R/Sub-W”:
The unit can be operated in 2-way
system.
• You cannot use the L.P.S. and Time Correction at the
same time.
Recalling the Stored Crossover/
Time Correction Settings
1 Press the DIVIDER button.
2 Press the g DN or f UP button to select
the stored content (Memory 1 or Memory 2).
Direct Recalling
Press the [1] or [2] button to recall the stored
adjustment.
3 Press the DIVIDER button to return to normal
mode.
NOTE
If you press the MODE button in step 2, the unit switches
to adjusting mode.
→→ →
Low
range (L)
Low
range (R)
Front high
range (L)
←← ←
Rear high∗
range (R)
Rear high
range (L)
Front high
range (R)
→→ →
Low range
(L)
Low range
(R)
Mid range
(L)
←← ←
High range∗
(R)
High
range (L)
Mid range
(R)
… 35 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alpine cda 7878 r at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alpine cda 7878 r in the language / languages: English, German, French, Italian, Swedish, Spanish as an attachment in your email.

The manual is 0,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info