168577
14
Zoom out
Zoom in
Previous page
1/48
Next page
12-EN
BAND
g DN f UP TITLE
MODE/Audio Control-/J
Basic Operation
Titling Discs
It is possible to title your favourite CD's.
1 Press the TITLE button and select the title
display mode.
For details, see Displaying the Title/Text (page
11).
2 Press and hold the TITLE button for at least 2
seconds. The first character will blink.
3 Press the BAND button to select the characters/
symbols.
4 Rotate the Audio Control knob to select the
desired letter/numeral/symbol available for
naming. (A for example).
5 Press the MODE button to store the first
character. The first character will stop blinking
and the display will automatically advance to the
next character. When that character begins to
blink, you may choose the next letter or symbol
of your title.
6 Repeat the steps 3 to 5 above to complete the
titling. Pressing the MODE button after entering
the 12th character, automatically stores the title
into memory.
When entering a title of less than 12 characters
(for example, 3 character title):
After entering 3 characters to complete your title,
the 4th character space will be blinking. Go to
step 7 to complete the title.
Upper case Lower case Numeral/Symbol
7 Press and hold the TITLE button for at least 2
seconds to record the title.
NOTES
You can enter 24 CD titles on this unit. If you try to
store beyond the limit, the display will show “FULL
DATA.” At this point, no more titles can be stored.
The CD Changer title length or memory capacity
varies depending upon the model being used.
To input a new title, one of the previously inputted
titles must first be deleted.
When you want to erase a title, enter the “
” symbol
into all spaces.
The operations described in steps 3 to 6 must be made
within 10 seconds. The input mode will be cancelled if
no action is taken for over 10 seconds.
Removing power from the unit may delete these titles.
Use caution when manipulating the power cord.
Erasing Disc Title
1 Press the TITLE button to select the titling mode.
Then, press and hold the button for at least 2
seconds.
2 Press and hold the -/J button for at least 2
seconds to activate the title scanning mode. The
title in the display will blink.
3 Press the g DN or f UP button repeatedly
until the title you want to erase is displayed.
4 Press and hold the -/J button for at least 2
seconds to erase the title displayed.
5 Press and hold the TITLE button for at least 2
seconds to cancel the title erasing mode.
NOTE
You cannot erase CD-TEXT.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alpine cda 7878 r at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alpine cda 7878 r in the language / languages: English, German, French, Italian, Swedish, Spanish as an attachment in your email.

The manual is 0,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info