536968
45
Zoom out
Zoom in
Previous page
1/57
Next page
45-EN
2.2ch (3WAY) mode
* Only when TW Setup is set to USER’S (refer to “Setting the Response
Slope for the High Range Speaker (TW Setup)” on page 40).
Notes
HPF (high pass filter): Cuts the lower frequencies and allows the higher
frequencies to pass.
LPF (low pass filter): Cuts the higher frequencies and allows the lower
frequencies to pass.
Slope: The level change (in dB) for a frequency change of one octave.
The higher the slope value, the steeper the slope becomes.
Adjust the slope to FLAT to bypass the HP or LP filters.
Do not use a tweeter without the HPF on or set to a low frequency, as it
may cause damage to the speaker due to the low frequency content.
You cannot adjust the crossover frequency higher than the HPF or lower
than the LPF.
Adjustment should be made according to the recommended crossover
frequency of the connected speakers. Determine the recommended
crossover frequency of the speakers. Adjusting to a frequency range
outside that recommended may cause damage to the speakers.
For the recommended crossover frequencies of Alpine speakers, refer to
the respective Owner’s Manual.
We are not responsible for damage or malfunction of speakers caused by
using the crossover outside the recommended value.
Controlling CD Changer (optional)
An optional 6-disc or 12-disc CD Changer may be connected to this unit
if it is Ai-NET compatible. With a CD Changer connected to the
Ai-NET input of this unit, the CD Changer will be controllable from this
unit.
Using the KCA-400C (Multi-Changer Switching device) or the
KCA-410C (Versatile Link Terminal) multiple changers can be
controlled by this unit.
Refer to “Multi-Changer Selection (optional)” on page 46 for selecting
the CD Changers.
Notes
The controls on this unit for CD Changer operation are operative only
when a CD Changer is connected.
The DVD changer (optional) is controllable from this unit as well as the
CD changer.
Depending on the connected DVD Changer, some functions may not be
available.
1
Press SOURCE to activate the CHANGER mode.
The display shows the disc number and track number.
Notes
The source indicator varies depending on the connected source.
•Press BAND to switch the Disc mode in the Changer mode.
2
Press ENTER to activate the search select mode.
3
Turn the Rotary encoder to select the Disc Search, and
then press ENTER.
4
Turn the Rotary encoder to select the desire disc in the CD
Changer.
The selected disc number appears in the display and CD/MP3
playback starts.
Note
After selecting the desired disc, you can operate in the same way as for
the CD player of this unit. For details, see the CD/MP3/WMA/AAC
section.
Cut-off frequency
(1/3 octave steps)
Slope
Level
HPF LPF HPF LPF
Low
range
speaker
----
20 Hz -
200 Hz
----
FLAT, 6,
12, 18,
24 dB/
oct.
0 to
−12 dB
Mid
range
speaker
20 Hz -
200 Hz
20 Hz -
20 kHz
FLAT, 6,
12, 18,
24 dB/
oct.
FLAT, 6,
12, 18,
24 dB/
oct.
0 to
−12 dB
High
range
speaker
1 kHz -
20 kHz,
(20 Hz ~
20 kHz)
*
----
FLAT
*
6,
12, 18,
24 dB/
oct.
----
0 to
−12 dB
Low range Mid range High range
(Dierent from actual display)
Level adjusting
(0 to −12 dB)
Output frequency range
Slope FLAT
Slope adjusting
20 Hz
(Dierent from actual display)
HPF cut-o
frequency
LPF cut-o
frequency
Changer (optional)
SOURCE/
/ II
BAND
/ENTER
Rotary encoder
45


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alpine CDA-137BTI at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alpine CDA-137BTI in the language / languages: English as an attachment in your email.

The manual is 4,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Alpine CDA-137BTI

Alpine CDA-137BTI User Manual - German - 65 pages

Alpine CDA-137BTI User Manual - Dutch - 64 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info