536968

Alpine CDA-137BTI Manual

40
Zoom out
Zoom in
Previous page
1/57
Next page
40-EN
2:
Subwoofer level change is different from the main volume setting.
For example, even at low volume settings, the subwoofer is still
audible.
The subwoofer output phase is toggled SUBWOOFER NORMAL (0°) or
SUBWOOFER REVERSE (180°). To adjust the level, turn the Rotary
encoder.
Setting item: SUBW. Phase
Setting contents:
PHASE 0° (Initial setting) / PHASE 180°
You can set the subwoofer output to stereo or monaural. Make sure to
set the correct output for your subwoofer type.
Setting item: SUBW. Channel
Setting contents:
STEREO (Initial setting) / MONO
STEREO:
Subwoofer stereo (L/R) output
MONO:
Subwoofer monaural output
10 typical equalizer settings are preset at the factory for a variety of
musical source material.
Flat Pops Rock News Jazz&Blues Electrical Dance
Hip Hop&Rap Easy Listening Country Classical
User1 User2 User3 User4 User5 User6
Note
• By selecting User's 1 to 6, you can recall the stored preset number (refer
to “Adjusting the Graphic Equalizer Curve” on page 41 or refer to
“Adjusting the Parametric Equalizer Curve” on page 41).
Setting the response characteristic of tweeter to FLAT in 2.2ch (3WAY)
mode could damage the speaker. Make sure the Crossover cut-off is
appropriate for the tweeter being used (Refer to “Adjusting the
Crossover Settings” on page 42).
Setting item: TW Setup
Setting contents:
FACTORY’S (Initial setting) / USER’S
FACTO RY’S :
As protection from possible speaker damage, FLAT cannot be set
for the response slope of the high range speaker in 2.2ch (3WAY)
mode.
USER’S:
The FLAT setting is possible in 2.2ch (3WAY) mode.
Setting item: Filter Type
Setting contents:
NORMAL (Initial setting) / INDIVIDUAL
NORMAL (L=R):
Left and right speakers are adjusted equally.
INDIVIDUAL (L/R):
Left and right speakers are individually adjusted.
When the Media Xpander is on, you can adjust the Media Xpander level
(refer to “Setting the MX Level” on page 40).
Setting item: Media Xpander
Setting contents:
OFF (Initial setting) / ON
MX (Media Xpander) makes vocals or instruments sound distinct
regardless of the music source. The CD, USB Memory and iPod/iPhone,
will be able to reproduce the music clearly even in cars with a lot of road
noise.
Changing the source to which you want to apply Media
Xpander.
CD (MX level 1 to 3):
CD mode processes a large amount of data during playback. MX
takes advantage of this large data quantity to reproduce a more
clear, clean output.
CMPM (MX level 1 to 3):
This corrects information that was lost at the time of compression.
This reproduces a well-balanced sound close to the original.
DVD (Video CD) (MOVIE MX level 1 to 2):
The dialogue portion of a video is reproduced more clearly.
(DVD MUSIC):
A DVD or Video CD contains a large quantity of data such as music
clip. MX uses this data to reproduce the sound accurately.
AUX (MX level 1):
Choose the MX mode (CMPM, MOVIE, or MUSIC) that corresponds
to the media connected.
Notes
• Each music source, such as CD and MP3/WMA/AAC can have its own
MX setting.
• On disks with both MP3/WMA/AAC and CD-DA, when the source
changes from “MP3/WMA/AAC to CD-DA” or “CD-DA to MP3/
WMA/AAC”, MX-mode switching may delay playback slightly.
• Setting to Non Effect sets MX mode of each music source to OFF.
• The function is inoperable when DEFEAT is set to ON.
• There is no MX mode for FM, MW and LW radio.
• If an audio processor with the MX function (PXA-H701, etc.) is
connected, its own MX processing is applied to the music source. Since
the processor MX settings may not match the head unit, the audio
processor needs to be adjusted. For details, refer to the Owner’s Manual
of the audio processor.
• “CMPM” is applied for MP3/WMA/AAC and iPod/iPhone.
Setting the Subwoofer Phase
Setting the Subwoofer Channel (SUBW.
Channel)
Equalizer Presets (Factory’s EQ)
Setting the Response Slope for the High
Range Speaker (TW Setup)
Setting the Filter type
Turning Media Xpander ON/OFF
Setting the MX Level
… 40 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alpine CDA-137BTI at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alpine CDA-137BTI in the language / languages: English as an attachment in your email.

The manual is 4,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Alpine CDA-137BTI

Alpine CDA-137BTI User Manual - German - 65 pages

Alpine CDA-137BTI User Manual - Dutch - 64 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info