Manual Alpina TR 250 J (page 10 of 24) (All languages)

731989

Zoom out

Zoom in

1/24

4EN

A) TRAINING

1) Read the instructions carefully. Become ac-

quain ted with the controls and the proper use of

the machine. Learn how to stop the engine quickly.

2) Only use the machine for the purpose for

which it was designed, namely

– cutting grass and non-woody vegeta-

tion, using a nylon line (e.g. around the edges

of lawns, owerbeds, walls, fences and small

gras sy areas to tidy up the cutting done using

a mower);

Any other use may be dangerous and damage

the machine.

Examples of improper use may include, but are

not limited to:

– use the machine for sweeping;

– trimming hedges or other jobs in which the cut-

ting device is not used on ground level;

– using the machine with the cutting device above

the operator’s belt level;

– using the machine for cutting non-plant mate rial;

– use of the machine by more than one person.

3) Never allow children or persons unfamiliar with

these instructions to use the machine. Local regu-

la tions can restrict the age of the user.

4) The machine must never be used by more than

one person.

5) Never use the machine:

– when people, especially children or pets are in

the vicinity;

– if the user is tired or unwell, or has taken medi-

cine, drugs, alcohol or any substances which

may slow his reexes and compromise his

judge ment;

– if the user is not capable of holding the machine

rmly with two hands and/or remaining standing

on the ground whilst working.

6) Keep in mind that the operator or user is re-

sponsible for accidents or hazards occurring to

other people or their property.

B) PREPARATION

1) Always wear adequate clothing which does not

hamper movements when using the machine.

– Always wear slim-tting protective clothing, t-

ted with shear-proof protection devices.

– Always wear a helmet, protective gloves, eye-

goggles, a half-mask respirator and safety anti-

shear boots with non-slip soles.

– Always wear ear and hearing protection de vi-

ces.

– Never wear scarves, shirts, necklaces, or any

han ging or apping accessory that could catch

in the machine or in any objects or materials in

the work area.

– Tie your hair back if it is long.

2) WARNING: DANGER! Petrol is highly am-

mable:

– keep the fuel in containers which have been

spe cically manufactured and homologated for

such use;

– never smoke when handling fuel;

– slowly open the fuel tank to allow the pressure

inside to decrease gradually;

– top up the tank with fuel in the open air, using

a funnel;

– add fuel before starting the engine. Never re-

move the fuel tank cap or add fuel while the

engine is running or when the engine is hot;

– if you have spilt some fuel, do not attempt to

start the engine but move the machine away

from the area of spillage and avoid creating any

source of ignition until the fuel has evaporated

and fuel vapours have dissipated;

– immediately clean up all traces of fuel spilt on

the machine or on the ground;

– never start the machine in the same place you

relled it with fuel;

– make sure your clothing does not come into con-

tact with the fuel, on the contrary, change your

clothes before starting the engine;

– always put the tank and fuel container caps back

on and tighten well.

3) Replace faulty or damaged silencers.

4) Before using the machine, check its general

condition and in particular:

– the throttle trigger and the safety lever must

move freely, they must not need forcing and

should return automatically and rapidly back to

the neutral position;

– the throttle trigger must remain locked until the

safety lever is pressed;

– the engine stop switch must easily move from

one position to the other;

– the electric cables and in particular the spark

plug cable must be in perfect condition to avoid

the generation of any sparks, and the cap must

be correctly tted on the spark plug;

– the machine handgrips and protection devices

must be clean and dry and well fastened to the

machine;

– the cutting devices and guards must be un da-

ma ged.

5) Check the correct position of the handgrips

and the connection point of the webbing, and the

proper balance of the machine.

6) Thoroughly inspect the whole work area and

remove anything that could be thrown up by the

machine or damage the cutting group or engine

(stones, branches, iron wire, bones, etc.).

C) OPERATION

1) Do not start the engine in a conned space

where dangerous carbon monoxide fumes can

collect.

SAFETY REQUIREMENTS

3. SAFETY REQUIREMENTS

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Alpina TR 250 J in the language / languages: All languages as an attachment in your email.

The manual is 1,4 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Alpina TR 250 J Manual

Product: