Manual Alpina TB 250 D (page 16 of 28) (All languages)

731981

Zoom out

Zoom in

1/28

The webbing must be put on before connecting

the machine to the special coupling and the belts

must be adjusted to suit the operator’s height and

stature.

If the machine has more than one coupling hole,

use the most favourable point for keeping the ma-

chine balanced when working.

Always use webbing suited to the weight of the

machine and the cutting device used

– the single or double belt models can be used

for machines weighing less than 7.5 kg t-

ted with the cutting line head or 3 or 4-point

blades;

– the double belt model must be used for ma-

chines weighing more than 7.5 kg tted

with the saw blade (if permitted).

• Single belt “MONO” models

The belt (1) must go over the left shoulder towards

the right hip.

• Double belt models

The belt (2) must be worn with:

– the machine’s support and snap-hook coupling

on the right side (2.1);

– the release in front (2.2);

– the belts cross-over on the operator’s back (2.3);

– the buckle properly fastened on the left side

(2.4).

The belts must be tensioned so that the load is

evenly distributed on the shoulders.

USING THE MACHINE

WARNING!

When working, the ma-

chine must always be rmly held in both

hands, keeping the power unit on the right of

the body and the cutting group below the line

of the belt.

WARNING!

Stop the engine immedi-

ately if the blade stops during sawing. Always

beware of a kickback, which could occur if a

blade encounters a solid object (logs, roots,

branches, stones, etc.). Do not touch the

ground with the blade. Kickbacks cause blade

recoils that are dicult to control, so as to

cause loss of control of the machine, com-

promise operator safety and cause damage

to the machine itself.

To respect people and the environment:

– Try not to cause any disturbance.

– Scrupulously comply with local regulations

and provisions for the disposal of waste

materials after sawing.

– Scrupulously comply with local regulations

and provisions for the disposal of oils, pet-

rol, damaged parts or any elements which

have a strong impact on the environment.

WARNING!

Prolonged exposure to vi-

brations can cause injuries and neurovascular

disorders (also called “Renaud’s syndrome”

or “white hand”), especially to people suer-

ing from circulation disorders. The symptoms

can regard the hands, wrists and ngers and

are shown through loss of sensitivity, torpor,

itching, pain and discolouring of or structural

changes to the skin. These eects can be

worsened by low ambient temperatures and/

or by gripping the handgrips excessively

tightly. If the symptoms occur, the length of

time the machine is used must be reduced

and a doctor consulted.

DANGER!

This machine’s starter

unit generates an average sized electromag-

netic eld, but it is not however possible to

exclude the possibility of interference on any

active or passive medical devices that opera-

tors may be wearing; this could be risky for

their health conditions. All those using med-

ical devices should always consult their GP,

or the device manufacturer, before using this

machine.

WARNING!

Always wear suitable clo-

thing when using the machine. Your dealer

can provide you with all the information on

the most suitable accident-prevention de-

vices to guarantee your safety.

USING THE WEBBING (Fig. 10)

WARNING!

The machine must al ways

be used connected to the webbing worn cor-

rectly. Frequently check the eciency of the

quick release mechanism used to quickly free

the machine from the belts in case of danger.

USING THE MACHINE

7. USING THE MACHINE

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Alpina TB 250 D in the language / languages: All languages as an attachment in your email.

The manual is 1,88 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Alpina TB 250 D Manual

Product: