Manual Alpina T 26 J (page 15 of 27) (All languages)

731918

Zoom out

Zoom in

1/27

32. Throttle control

33. Throttle lockout

34. Starter grip

35. Choke

36. Primer

37. Throttle shutter (if provided)

38. Fuel mixture tank cap

The example of the conformity declaration is

found in the penultimate page of the manual.

DESCRIPTION OF EXPLANATORY

SYMBOLS (where applicable)

41. Fuel mixture tank

42. Engine stop switch positions

a = stop

b = running

43. Choke

44. Primer

45. Cutting device rotation direction

SAFETY REQUIREMENTS

Your machine must be used carefully. Symbols

have therefore been placed on various parts of

the machine to remind you of the main precau-

tions to be taken. Their meaning is explained

below. You are also asked to carefully read the

safety regulations in the specic chapter of this

manual.

Replace damaged or illegible labels.

51. Warning! Danger. The failure to use this ma-

chine correctly can be hazardous for oneself

and others.

52. Read the instruction manual before using

the machine.

53. Anyone operating the machine under nor-

mal conditions for continuous daily use may

be exposed to a noise level equal to or ex-

ceeding 85 dB (A). Wear ear protectors,

safety goggles and a protective helmet.

54. Projectile object hazard! Keep any people

or pets at least 15 m away when using the

machine!

55. Maximum cutting device speed. Only use

suitable cutting devices.

56. Do not use pointed, rigid or metal blades or

circular saw blades.

57. Only one cutting line head can be used on

this machine.

58. Warning! Petrol is ammable. Allow engine

to cool at least 2 minutes before refuelling.

59. Warning! Keep away from hot surfaces.

SAFETY REGULATIONS

to be observed scrupulously

A) TRAINING

1) WARNING! Read these instructions care-

fully before operating the machine.

Become acquainted with the controls and the

proper use of the machine. Learn how to stop the

engine quickly. Save all warnings and instruc-

tions for future reference.

2) Never allow children or persons unfamil-

iar with these instructions to use the machine.

Local laws can restrict the minimum age of the

operator.

3) Never operate while people, especially chil-

dren, or pets are nearby.

4) Never use the machine if the user is tired or

unwell, or has taken medicine, drugs, alcohol or

any substances which may slow his reexes and

compromise his judgement.

5) Bear in mind that the operator or user is re-

sponsible for accidents or unexpected events

occurring to other people or their property. It is

the user’s responsibility to assess the potential

risk of the area where work is to be carried out,

and to take all the necessary precautions to en-

sure his own safety and that of others, particu-

larly on slopes or rough, slippery and unstable

ground.

6) If the machine is sold or lent to others, make

sure that the operator looks over the user in-

structions contained in this manual.

7) Before tackling a mowing job for the rst time

it is advisable to gain the necessary familiar-

ity with the machine and the most suitable cut-

ting techniques, nding out how to wear the har-

nesses correctly, rmly gripping the machine

and maki

ng the movements required by the job.

B) PRELIMINARY OPERATIONS

1) Always wear adequate clothing which does

not hamper movements when using the ma-

chine.

– Always wear slim-tting protective clothes,

anti-vibration gloves, protective goggles, half-

mask respirator, protective earplugs, anti-

shear safety boots with non–slip soles.

– Never wear scarves, shirts, necklaces or any

hanging or apping accessory that could

catch in the machine.

– Tie your hair back if it is long.

2) Thoroughly inspect the entire work area and

remove anything that could be thrown by the

machine or damage the cutting means (stones,

branches, iron wire, bones, etc.).

3) Before using the machine, check its general

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Alpina T 26 J in the language / languages: All languages as an attachment in your email.

The manual is 1,84 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Alpina T 26 J Manual

Product: