Manual Alpina SHT 500 (page 13 of 19) (All languages)

731905

Zoom out

Zoom in

1/19

to prevent the extension lead from dis-

connecting accidentally. Make sure it is

connected to the socket without being

forced. Ne ver touch a live electric cable if

it is poor ly insulated. If the extension lead

gets da maged during use, do not touch

the ca ble and unplug the extension lead

im me dia tely.

9) Be careful of ying debris coming from

the cutting device.

10) Stop the motor and unplug the machine

from the mains:

– whenever you leave the machine un-

attended;

– before cleaning, checking or working

on the machine;

– after striking a foreign object. Inspect

the machine for any damage and make

repairs before restarting it again;

– if the machine starts to vibrate abnor-

mally: nd the cause of the vibration

imme dia tely and have it inspected at a

Spe cia li sed Centre;

– when the machine is not in use.

11) Always keep hands and feet away from

the cutting device, especially when start-

ing the motor.

IMPORTANT

Remember that an electric

hedge trimmer used incorrectly can be a disturb-

ance to others. To respect people and the environ-

ment:

– Avoid using the machine in environments or at

times of the day when it may disturb others.

– Scrupulously comply with local regulations and

provisions for the disposal of waste materials

after cutting.

– To avoid the risk of re, do not leave the ma-

chine with the motor hot on leaves or dry grass.

– Scrupulously comply with local regulations and

provisions for the disposal of damaged parts or

any elements which have a strong impact on the

environment.

WARNING! Prolonged exposure to vi-

bra tions can cause injuries and neurovascu-

lar disorders (also called “Renaud’s syn-

drome” or “white hand”), especially to people

suffering from circulation disorders. The

symptoms can regard the hands, wrists and

ngers and are shown through loss of sensi-

tivity, torpor, itching, pain and discolouring of

or structural changes to the skin. These ef-

fects can be worsened by low ambient tem-

peratures and/or by gripping the handgrips

excessively tightly. If the symptoms occur, the

length of time the machine is used must be

reduced and a doctor consulted.

1. USING THE MACHINE

WARNING! When cutting, always hold

the machine rmly with both hands.

Immediately stop the motor if the

blades block while running or if they get

caught up in the hedge branches.

2. REGULATING THE HANDGRIP (Fig. 3)

The rear handgrip (1) can be adjusted to 5 dierent

positions in relation to the cutting device to make

trimming your hedges easier.

WARNING! The handgrip must only

be adjusted when the motor is switched o.

– Pull the release lever backwards (2).

– Rotate the rear handgrip (1) to the desired pos-

ition.

– Before using the machine check that the re-

lease lever (2) has correctly returned to its ori-

ginal position, and the rear handgrip is rmly

attached.

NOTE

The release lever can only

be enabled when the switch (3) has been re-

leased. The switch can be pressed when the re-

lease lever has correctly returned to its original

position, and the handgrip is tted in one of the 5

possible positions.

NOTE

When working, the

rear handgrip must always be in a vertical

position, whatever the position of the cutting

de vi ce (3).

3. WORKING TECHNIQUES

It is recommended to trim the two vertical sides of

the hedge before trimming the top.

• Vertical trimming (Fig. 4)

Proceed to cut by using curved movements from

the bottom towards the top, keeping the blade as

far from the body as possible.

• Horizontal trimming (Fig. 5)

8 USING THE MACHINE

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Alpina SHT 500 in the language / languages: All languages as an attachment in your email.

The manual is 1,44 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Alpina SHT 500 Manual

Product: