731970
9
Zoom out
Zoom in
Previous page
1/21
Next page
EN
IDENTIFICATION OF MAIN COMPONENTS / SYMBOLS 3
1) Keep bystanders away.
2) The tool continues to move even after it has
been switched o.
3) Warning! Danger. Failure to use this machine
cor rectly can be hazardous for oneself and
o thers.
4) Disconnect the plug from the mains before
commencing maintenance work or if the power
cord is damaged.
5) Read the instruction manual before using the
machine.
6) Do not leave the machine in the rain (or in
damp conditions).
7) If you are using the machine every day in nor-
mal conditions, you can be exposed to a noise
level of 85 dB (A) or higher. Wear safetyglas-
ses and hearing protection.
8) Cutting device rotation direction.
[1]
Notice:
The vibration value indicated was determined with a standardized tool and can be used to make comparisons with other electric equipment
as well as temporary estimates of the load through the vibrations.
WARNING!
The vibration value may vary according to the usage of the machine and its tted equipment, and be higher than the one indicated. Safety
measures must be established to protect the user and must be based on the load estimate generated by the vibrations in real usage conditions.
In this regard, all the operational cycle phases must be taken into consideration, such as switching o or idle running.
TECHNICAL DATA Model
SGT 350 SGT 600
Power supply voltage V~ 230-240 230
Power supply frequency Hz 50 50
Engine Power W 350 600
Cutting width cm 25 30
Mass Kg 1,9 2,8
No-load Speed min
-1
11.000 11.000
Maximum noise and vibration levels [1] Model
SGT 350 SGT 600
Sound pressure level
Measurement uncertainty
dB(A)
dB(A)
85,2
1
79,8
1
Measured acoustic power level
Measurement uncertainty
dB(A)
dB(A)
94,2
0,72
93,5
0,2
Guaranteed
acoustic
power level dB(A) 96 96
Vibration level
Measurement uncertainty
m/s
2
m/s
2
3,22
1,5
2,35,
1,5
2. SYMBOLS
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alpina SGT 600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alpina SGT 600 in the language / languages: All languages as an attachment in your email.

The manual is 1,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info