Manual Alpina SGT 350 (page 14 of 21) (All languages)

731969

Zoom out

Zoom in

1/21

8 USING THE MACHINE

WARNING! For your safety and that of

others:

1) Keep in mind that the operator or user is

re sponsible for accidents or hazards oc-

curring to other people or their property.

2) Always wear suitable clothing when using

the machine. Your dealer can provide you

with all the information on the most suita-

ble accident-prevention devices to guaran-

tee your safety.

3) Thoroughly inspect the whole work area

and remove anything that could be thrown

up by the machine or damage the cutting

de vice (stones, branches, iron wire, bones,

etc.).

4) Use the cable clamp to prevent the exten-

sion lead from disconnecting accidentally.

Make sure it is connected to the socket

without being forced. Ne ver touch a live

electric cable if it is poor ly insulated.

5) Be careful of ying debris coming from the

cutting device.

6) Stop the motor and unplug the machine

from the mains:

– if the machine starts to vibrate abnor-

mally: nd the cause of the vibration

imme dia tely and have it inspected at a

Spe cia li sed Centre;

– whenever you leave the machine unat-

tended.

IMPORTANT

Remember that an electric

grass trimmer used incorrectly can be a distur-

bance to others. To respect people and the envi-

ronment:

– Avoid using the machine in environments or at

times of the day when it may disturb others.

– Scrupulously comply with local regulations and

provisions for the disposal of waste materials

after cutting.

– To avoid the risk of re, do not leave the ma-

chine with the motor hot on leaves or dry grass.

– Scrupulously comply with local regulations and

provisions for the disposal of damaged parts or

any elements which have a strong impact on the

environment.

WARNING! Prolonged exposure to vi

bra tions can cause injuries and neurovascu-

lar disorders (also called “Renaud’s syn-

drome” or “white hand”), especially to people

suffering from circulation disorders. The

symptoms can regard the hands, wrists and

ngers and are shown through loss of sensi-

tivity, torpor, itching, pain and discolouring of

or structural changes to the skin. These ef-

fects can be worsened by low ambient tem-

peratures and/or by gripping the handgrips

excessively tightly. If the symptoms occur, the

length of time the machine is used must be

reduced and a doctor consulted.

1. USING THE MACHINE

WARNING! When working, the ma-

chine must always be rmly held in both

hands, keeping the cutting group below the

line of the belt.

The cutting line head can eliminate tall grass and

non-woody vegetation near fences, walls, foun-

dations, pavements, around trees, etc. or to com-

pletely clean a particular area of the garden.

WARNING! The use of metal or rigid

bla des of any type with this machine is prohib-

ited.

2. ERGONOMIC AND FUNCTIONAL

ADJUSTMENTS

(Only for SGT 600) (Fig. 5)

A variety of adjustments can be made to the ma-

chine to adapt it to the physique of the operator

and the type of work it is required to perform.

WARNING! All adjustments must en-

sure that the operator is ALWAYS situated

behind the cutting device.

WARNING! Always disconnect the ex-

tension lead from the mains before perform-

ing any adjustments.

• Aligning the rear handgrip and adjusting

the length of the connection pipe

– Loosen the handle (1).

– Pull or push the connection pipe (2) until it

reaches the desired length.

– The rear handgrip (3) can be rotated to a maxi-

mum of 180° where necessary.

– Tighten the handle (1) rmly when all adjust-

ments have been completed.

7. USING THE MACHINE

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Alpina SGT 350 in the language / languages: All languages as an attachment in your email.

The manual is 1,09 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Alpina SGT 350 Manual

Product: