506700

Alpina SF 5006 Manual

3
Zoom out
Zoom in
Previous page
1/16
Next page
ENGLISH
- 3 -
• Ensure that the mains cables does not hang over sharp edges and keep it away from hot
objects and open flames. Only pull it out of the socket by the plug, not by the cable.
• Place the appliance on a stable, even surface, away from hot objects or open flames (e.g.
hotplates).
• Lay the cable – and the extension cable, if required – in such a way that it cannot be
inadvertently pulled and no one can trip over it.
• This device is not suitable for commercial use nor for use in open air. Do not use fan in a
window.
• You should never leave the device unattended during use.
• Children cannot recognize the hazards which attend improper handling of electrical
devices. Therefore, children should never use electrical domestic appliances unsupervised.
• Remove the mains plug from the socket when the device is not in use and before cleaning.
• Never attempt to put any object or your fingers into the fan while the fan is in operation.
• Never operate the fan without the protective grille, and do not cover the grille.
1.Body
2.Front base
3.Screw
4.Screw
5.Cord mount
6.Power cord
7.ON/OFF Switch
8.Speed Selector
9.Timer
10.Oscillation /Swing
11.Wind wave
12.Timer
13.Swing
14.Wind
15.Speed
16.On/Off
Inserting / changing batteries of your
Remote control unit:
Your fan is equipped with remote
control unit. Before first use you
should remove the back cover &
insert 2 x AAA batteries with correct
polarity as show in the battery
compartment of the remote control
(batteries not included) , then put
back cover tightly.
Super Quite operation
Space saving smart Design
90 degree oscillation (use the degree sign)
Remote control
BEFORE FIRST USE
• Remove all packaging material.
• Pull power cord (7) out slightly.
• Put the rear base (2) on the body (1) by inserting the cylinders under the body (1) to blind
holes on rear base (2).
• Put front base (3) on rear base (2) and body (1), fix body (1), rear base (2) and front
base (3) with screws (4).
• Press power cord with cord mount (6) and fix the screws (5).
OPERATION
3 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alpina SF 5006 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alpina SF 5006 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 0,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info