Manual Alpina SF-2205 (page 4 of 56) (English, German, Dutch, French, Italian, Spanish)

495934

Zoom out

Zoom in

1/56

ENGLISH

- 4 -

Variable suction control

Note:

Once all attachments are in place, unwind a sufficient length of cable and insert the plug into

the wall outlet. A yellow mark on the power cord shows the ideal cable lenghth. Do not pull

the power cord beyond the red mark.

1. Insert the power plug into the wall outlet.

2. Press the power on/off button located the unit to turn the vacuum cleaner “on”.

3. To rewind the power cord, press the cord rewind button with one hand and guide the

power cord with the other hand to ensure that it dose not whip causing damage or injury.

4. To adjust the suction, slide the speed control button on the suction hand to control the

suction power of the vacuum cleaner.

Motor thermostat (Optional)

Important:

This motor is equipped with a motor protective thermostat. If for some reason the vacuum

cleaner should overheat, the thermostat will automatically turn the unit off. Should this occur

unplug the vacuum cleaner from the wall outlet and turn off switch, change dust bag and clean

filters. Allow the unit to cool for approximately 1 hour. To restart, replug into wall outlet and

turn switch back on.

Clean the dust barrel:

1. Press the knob on the dust cup arm

2. Lift dust barrel up

3. Press knob on low end of du st barrel to open the dust barrel cover.

Carry and move away the cleaner:

Note:

This cleaner have a handle at top rear of the body, you can use it to conveniently to carry the

appliance.

Removing & cleaning pre-motor filter and air outlet filter

Warning:

Always unplug the unit from electrical outlet before getting out the dust barrel.

a. Pre-motor filter

1. Press the knob on the dust cup arm

2. Lift dust barrel up

3. Take out the pre-motor filter for cleaning and changing..

b. Centri-Hepa filter

1. Press the knob on the dust cup arm.

2. Lift dust barrel up.

3. Press knob on low end of dust barrel to open the dust barrel cover.

4. Take out the centric Hepa for clean and change.

c. Air outlet filter

Press the air outlet grid knob to open

2. Take out the air outlet filter for clean and change.

Please note: The sponge filter material in the cleaner will became dusty over time. This is

normal and will not affect the performance of the filter. If the sponge filter is so dusty that

suction does not return to 100%, then we suggest that the filter be removed then rinsed

under the faucet and allowed to dry for 24 hours by airing not near the fire or some high

temperature objects before refitting into the vacuum. This should be done once six months or

when suction appears to be reduced obviously.

Important:

Please note that there is a safety switch inside the vacuum to prevent the unit from being run

withhigh vacuum rate. If the vacuum is too high ,the safety switch will be turned on. In this

case, it can minish the vacuum rate and protect the motor from being broken.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Alpina SF-2205 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,61 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Alpina SF-2205 Manual

Product: