661815
14
Zoom out
Zoom in
Previous page
1/51
Next page
14
ITALIANO
ISTRUZIONI GENERALI
RIEMPIRE IL SERBATOIO
1. Assicurarsi che la spina sia scollegata dalla presa.
2. Spostare il selettore del vapore su “0”.
3. Aprire il coperchio.
4. Sollevare l’estremità del ferro da stiro per permettere all’acqua di entrare senza scorrere fuori.
5. Versare l’acqua lentamente nel serbatoio senza superare il livello “MAX” (circa 300 ml) e chiudere il coperchio.
STIRATURA A VAPORE
La quantità di vapore è regolata dal selettore del vapore.
Spostare il selettore del vapore su una posizione tra il minimo e il massimo secondo la quantità di vapore necessario e la
temperatura selezionata. Attenzione: il ferro da stiro emette vapore continuamente solo se si tiene il ferro in orizzontale.
Si può interrompere l’emissione continua di vapore mettendolo in verticale o spostando il selettore del vapore su “0”.
Come indicato sulla manopola del termostato e nella tabella iniziale, si può usare il vapore solo alle temperature più
elevate. Se la temperatura selezionata è troppo bassa, dell’acqua potrebbe gocciolare sulla piastra.
STIRATURA A SECCO
Per stirare senza il vapore, seguire le istruzioni nella sezione “stiratura a vapore”, lasciando il selettore del vapore nella
posizione “0”.
FUNZIONE SPRAY
Assicurarsi che ci sia acqua nel serbatoio. Premere il bottone spray lentamente (per uno spruzzo denso) o velocemente
(per uno spruzzo vaporizzato). Attenzione: per tessuti delicati, raccomandiamo di umidificare il tessuto prima di usare la
funzione spray, o di mettere un panno umido tra il ferro e il tessuto. Per evitare la formazione di macchie, non usare lo
spray in tessuti di seta o sintetici.
AUTO-PULITURA
La funzione di auto-pulitura pulisce l’interno della piastra, rimuovendo le impurità. Raccomandiamo di usarla ogni 10-15
giorni.
Istruzioni:
- Riempire il serbatoio fino al livello massimo indicato e impostare il selettore del vapore
- Impostare la manopola del termostato alla temperature massima e attendere che la luce si spenga.
- Tirare la spina dalla presa e tenere il ferro orizzontalmente sopra il lavello.
- Tenere il bottone di auto-pulitura finché tutta l’acqua bollente, il vapore e le impurità fuoriescono.
- Quando la piastra si è raffreddata, si può pulire con un panno umido.
CONSIGLI UTILI
1. Il ferro è ideato con filtro anti calcio e sistema anti caduta per evitare che l’acqua perda dalla piastra quando il ferro è
freddo.
2. Il vapore fornisce una spinta ulteriore che è ideale per rimuovere le pieghe e pieghette.
3. Il ferro ha un sistema di vapore verticale per appendere panni, tende e agganci, ecc.
Avvertenza:
Questo apparecchio è dotato di un cavo di alimentazione tipo G 2-pin. È una caratteristica di sicurezza. Non cercare di
smontare la macchina.
Pericolo di surriscaldamento:
Fare attenzione quando si usa l’umidificatore. Il vapore emesso dall’apertura può essere molto caldo.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alpina SF-1304 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alpina SF-1304 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Swedish as an attachment in your email.

The manual is 0,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info