731535

Alpina SD 98 Series Manual

35
Zoom out
Zoom in
Previous page
1/59
Next page
EN - 8

it outside the side discharge chute.
3. Fit the pin  in the holes on the
 and on the side discharge
chute, so that it passes through the coils
of the spring  and the drilled end

4. Insert the cotter pin  in the pin
 hole  and rotate the pin



and cause the pin to fall out .
Check that the spring works
correctly and keep the side discharge
chute securely lowered. Make sure that
the pin is fitted properly to prevent
it from falling out accidentally.
IMPORTANT For models with optional
side unloading: make sure that the side
unloading guard (Fig. 13.A) is lowered and
locked by the safety lever (Fig. 13.B).
IMPORTANT Before disassembling or
servicing the deector, always push the safety
lever (Fig. 14.B) and lift the side unloading
guard (Fig. 14.A) to allow disassembly.
NOTE To remove the deector, perform
assembly steps in reverse order.
4.7 
MEANS ASSEMBLY SIDE

SIDE DISCHARGE MODELS





4.8 REAR PLATE ASSEMBLY AND


1. 




2. 

3. 



4. 



5. 
6. 


7. 





5. CONTROLS
5.1 KEY IGNITION SWITCH


10.A
1. Stop position.

2. Headlights On position (if
After turning the engine

.

3. On position. All services
are enabled..
4. Start position.



5.2 THROTTLE CONTROL



A. Type “I” with separate Choke
command 
B. Type “II” 
The positions indicated correspond to:
1. Choke Command - Cold start.

The «CHOKE» position enriches the


… 35 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alpina SD 98 Series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alpina SD 98 Series in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 4,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info