732052
9
Zoom out
Zoom in
Previous page
1/24
Next page
EN
IDENTIFICATION OF MAIN COMPONENTS / SYMBOLS 3
1) Read the instruction manual before using the
machine.
2) If you are using the machine every day in nor-
mal conditions, you can be exposed to a noise
level of 85 dB (A) or higher. Wear safety glasses
and hearing protection. Wear safety glasses and
hearing protection.
3) Maximum permitted length of the bar. Do not
use longer bars.
4) Do not leave the machine in the rain (or in
damp con ditions).
5) Unplug the chain-saw immediately if the ca ble
(or extension lead) is cut or damaged.
2. SYMBOLS
21 3 54
11) Direction in which the chain is mounted
EXPLANATORY SYMBOLS ON THE MACHINE (if present)
11
[1]
Notice:
The vibration value indicated was determined with a standardized tool and can be used to make comparisons with other electric equipment
as well as temporary estimates of the load through the vibrations.
WARNING!
The vibration value may vary according to the usage of the machine and its tted equipment, and be higher than the one indicated. Safety
measures must be established to protect the user and must be based on the load estimate generated by the vibrations in real usage conditions.
In this regard, all the operational cycle phases must be taken into consideration, such as switching o or idle running.
Maximum noise and vibration levels [1] Model
EA 1800 EA 2000 Q
Operator ear noise pressure level dB(A) 84,7 84,53
– Measurement uncertainty dB(A) 3 3
Measured acoustic output level dB(A) 105 105
– Measurement uncertainty dB(A) 0,32 0,64
Garanteed sound power level
dB(A) 109 109
Vibration level
- Front handle
- Rear handle
m/sec
2
m/sec
2
4,733
6,127
4,957
5,418
Measurement uncertainty m/sec
2
1.5 1.5
TECHNICAL SPECIFICATIONS
Voltage V~ 230 230
Power frequency Hz 50 50
Motor power W 1800 2000
Bar length cm 35 40
Cutting length cm 33,5 38,5
Chain speed m/sec 13,5 13,5
Weight kg 3.75
÷
3.9 3.75
÷
3.9
Oil tank capacity ml 85 85
Maximum admissible rpm without load
min
-1
7600 7600
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alpina EA 2000 Q at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alpina EA 2000 Q in the language / languages: All languages as an attachment in your email.

The manual is 2,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info