732051
19
Zoom out
Zoom in
Previous page
1/24
Next page
MAINTENANCE AND STORAGE 13
EN
Chain maintenance table
The table gives the sharpening data for dierent types of chains, but this
does not mean you can use chains other than those approved and listed in the “Correct bar
and chain combination table”.
WARNING!
Chain pitch Limiter tooth level (a) File diameter (d)
inches mm inches mm inches mm
3/8 Mini 9.32 0.018 0.45 5/32 4.0
0.325 8.25 0.026 0.65 3/16 4.8
3/8 9.32 0.026 0.65 13/64 5.2
0.404 10.26 0.031 0.80 7/32 5.6
a d
a d
same way (right or left).
Turn the bar over in the vice and repeat on all the
other cutting edges.
Check that the limiter tooth does not stick out
further than the inspection instrument and le
any projecting parts with a at le, rounding o
the edge.
After sharpening, remove all traces of ling and
dust and lubricate the chain in an oil bath.
Replace the chain whenever:
The length of the cutting edges reduces to 5
mm or less;
There is too much play between the links and
the rivets.
7. BAR MAINTENANCE (Fig. 22)
To avoid asymmetrical wear on the bar, make sure
it is turned over periodically.
To keep the bar in perfect working order, proceed
as follows:
Grease the bearings on the nose sprocket (if
pre sent) with the syringe.
Clean the bar groove with the scraper.
– Clean the lubrication holes.
With a at le, remove burr from the edges and
level o the guides.
Replace the bar whenever:
the groove is not as deep as the height of the
drive links (which must never touch the bottom);
the inside of the guide is worn enough to make
the chain lean to one side.
8. EMPTYING AND FLUSHING
THE OIL TANK
(Only if organic oil is used for the chain)
The use of some types of organic oil may cause
deposits or fouling after a certain period of use.
If this happens, before leaving the machine unu-
sed for a long period of time:
disassemble the chain and the bar;
empty the oil tank;
pour a specic liquid cleanser in the tank, to
about half the maximum level;
close the tank cap and operate the machine until
all the cleanser runs out.
Remember to ll with oil, before using the machine
again.
9. ELECTRIC CABLES
Check the condition of the
electric cables regularly and replace them if
they are worn or their insulation looks dam-
aged.
WARNING!
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alpina EA 1800 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alpina EA 1800 in the language / languages: All languages as an attachment in your email.

The manual is 2,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info