608381

Alpina C 46 Manual

30
Zoom out
Zoom in
Previous page
1/460
Next page
EN
PROPER USE / IMPROPER USE
Only use the machine for the purpose for which it was de-
signed, that is for “felling, bucking and delimbing trees
with dimensions suitable for the length of the bar” or
wooden objects with the same characteristics. Any other
use may be dangerous and damage the machine.
Examples of improper use may include, but are not limited
to:
– trimming hedges;
– intaglio carving;
– sectioning pallets, crates and various packing materials;
– sectioning furniture or other materials with nails, screws
or other metal components;
– butchering meat;
– using the machine to lift, move or split objects;
– using the machine while fastened to fixed supports.
Do not use chain saw for cutting plastic, masonry or non-
wood building materials. Use of the chain saw for opera-
tions different than intended could result in a hazardous sit-
uation.
A) TRAINING
1) Read the instructions carefully. Become acquainted
with the controls and the proper use of the machine. Learn
how to stop the engine quickly.
2) Never allow children or persons unfamiliar with these
instructions to use the machine. Local regulations may re-
strict the age of the operator.
3) The machine must never be used by more than one
person.
4) Never use the machine:
– when people, especially children or pets are in the vicin-
ity;
– f the user is tired or unwell, or has taken medicine,
drugs, alcohol or any substances which may slow his re-
flexes and compromise his judgement;
– if the user is not capable of holding the machine firmly
with two hands and/or remaining standing on the ground
whilst working.
5) Remember that the operator or user is responsible for
accidents or hazards occurring to other people or their
property.
B) PREPARATION
1) Always wear adequate clothing which does not
hamper movements when using the machine.
– Always wear slim-fitting protective clothing, fitted with
shear-proof protection devices.
– Always wear a helmet, protective gloves, eye-goggles,
a half-mask respirator and safety anti-shear boots with
non-slip soles.
– Always wear ear and hearing protection devices.
– Never wear scarves, shirts, necklaces, or any hanging
or flapping accessory that could catch in the machine or
in any objects or materials in the work area
– Tie your hair back if it is long.
2) WARNING: DANGER! Fuel is highly flammable:
– keep the fuel in containers which have been specifically
manufactured and homologated for such use;
– never smoke when handling fuel;
– slowly open the fuel tank to allow the pressure inside to
decrease gradually;
– top up the tank with fuel in the open air, using a funnel;
– add fuel before starting the engine. Never remove the
fuel tank cap or add fuel while the engine is run-
ning or when the engine is hot;
4 SYMBOLS / SAFETY REQUIREMENTS
3. SAFETY REQUIREMENTS
11) Fuel tank
12) Chain oil tank and oil flow adjuster
13) Carburettor adjustments
L = low speed mixture adjuster
H = high speed mixture adjuster
T = idle speed adjuster
14) Choke
15) Primer
16) Chain brake (the symbol shows
the position in which the brake is released)
EXPLANATORY SYMBOLS ON THE MACHINE (if present)
11
12
13
14
15
16
… 30 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alpina C 46 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alpina C 46 in the language / languages: All languages as an attachment in your email.

The manual is 8,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info