731962

Alpina ATR 1.0 EJ Manual

16
Zoom out
Zoom in
Previous page
1/20
Next page
– Fix the line cutting knife in a vice and sharpen it
using a at le, being careful to retain the origi-
nal cutting angle.
– Ret the knife on the guard.
4. ELECTRIC CABLES
WARNING!
Check the condition of the
electric cables regularly and replace them if
they are worn or their insulation looks dam-
aged.
If the appliance’s power supply wire is damaged,
it must be replaced by the manufacturer, service
agent or a similar qualied person.
5. EXTRAORDINARY MAINTENANCE
All maintenance operations not foreseen in this
manual must be performed exclusively by your
dealer.
All and any operations performed in unauthorised
centres or by unqualied persons will totally invali-
date the warranty.
6. STORAGE
After every work stint, clean the machine thor-
oughly to remove all dust and debris, and repair
or replace any faulty parts.
The machine must be stored in a dry place away
from the elements and out of the reach of children.
WARNING!
For your safety and that of
others:
– After each use, disconnect the machine
from the mains and check for damage.
– Correct maintenance is essential to main-
tain the original eciency and safety of the
machine over time.
– Keep all nuts, bolts and screws tight to be
sure the equipment is in safe working con-
dition.
– Never use the machine with worn or dam-
aged parts. Damaged parts are to be re-
placed and never repaired.
– Only use original spare parts. Parts that are
not of the same quality can seriously dam-
age the equipment and compromise safety.
WARNING!
During maintenance op-
erations unplug the machine from the mains.
1. MOTOR COOLING
To avoid overheating and damage to the motor,
always keep the cooling air vents clean and free
of sawdust and debris.
2. HEAD COIL REPLACEMENT (Fig. 10)
– Follow the sequence indicated in the gure.
3. SHARPENING THE LINE CUTTING KNIFE
(Fig. 11)
– Unscrew the two screws (1) and remove the line
cutting knife (2) from the guard (3).
EN
10 MAINTENANCE AND STORAGE / ACCESSORIES
8. MAINTENANCE AND STORAGE
The table contains a list of all available accesso-
ries, indicating those which may be used on each
machine, marked with the symbol “ ”.
WARNING!
In consideration that the
selection, application and usage of the ac ces
sory to be tted in the variety of possible us-
age are actions made solely by the user, the
latter assumes responsibility for damages of
any kind due to such actions. When in doubt
or if lacking knowledge of the specicity of
each accessory, contact your retailer or spe-
cialised gardening centre.
9. ACCESSORIES
Code Model T 1.0 EJ
118801750/0 (M8 x 1,25 dx M)
… 16 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alpina ATR 1.0 EJ at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alpina ATR 1.0 EJ in the language / languages: All languages as an attachment in your email.

The manual is 1,14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info