731527
87
Zoom out
Zoom in
Previous page
1/251
Next page
8
4. Volver a montar el tapón de
descarga (g. 6.G), asegurándose
del correcto posicionamiento de la
junta y apretándolo a fondo.
5. Rellene con nuevo aceite (apdo. 5.1.1).
6. Controlar en la varilla (g. 6.B) que el nivel
del aceite alcance la muesca «MAX».
7. Volver a poner el tapón (g. 6.A) y limpiar
cada resto de aceite eventualmente vertido.
6.4 LIMPIEZA DEL SILENCIADOR
Y DEL MOTOR
La limpieza del silenciador se debe
realizar con el motor frío.
Con un chorro de aire comprimido
(g. 7.A), quite del silenciador y de su
protección cualquier desecho o suciedad
que pueda provocar incendio.
Asegúrese de que las tomas de aire de
enfriamiento no estén obstruidas (g. 7.A).
Limpie las partes plásticas con una esponja
(g. 7.B) mojada con agua y detergente.
6.5 MANTENIMIENTO DEL
FILTRO DEL AIRE
1. Limpie la zona alrededor de la
tapa (g. 8.A) del ltro.
2. Quite la tapa (g. 8.A)
desatornillando los dos pomos.
3. Quite el elemento ltrante (g. 8.B + 8.C).
4. Quite el pre-ltro (g. 8.C)
del cartucho (g. 8.B).
5. Sacuda el cartucho (g. 8.B) sobre
una supercie sólida y sople con aire
comprimido desde el lado interno
para extraer polvos y residuos.
6. Lave el pre-ltro de esponja (g. 8.C) con
agua y detergente y déjelo secar al aire.
IMPORTANTE No use agua,
gasolina, detergentes o similares
para la limpieza del cartucho.
IMPORTANTE El pre-ltro de la (g. 8.C)
de esponja NO se debe mojar con aceite.
1. Limpie el polvo y los residuos del interior
del compartimento (g. 8.D) del ltro,
prestando atención a cerrar el conducto
de aspiración con un paño (g. 8.E)
para evitar que entren en el motor.
2. Extraiga el paño (g. 8.E), coloque
el elemento ltrante (g. 8.C + 8.B)
en su compartimento y vuelva
a montar la tapa (g. 8.A).
6.6 CONTROL Y MANTENIMIENTO

1. Desmonte la bujía (g. 9.A) con
una llave de tubo (g. 9.B).
2. Limpie los electrodos (g. 9.C) con un
cepillo metálico eliminando eventuales
depósitos carbonosos.
3. Controle con un espesímetro
(g. 9.D) la correcta distancia entre
los electrodos (0,6 - 0,8 mm).
4. Desmonte la bujía (g. 9.A) y apriete a
fondo con una llave de tubo (g. 9.B).
Sustituya la bujía si los electrodos
estuvieran quemados o si la porcelana
estuviera rota o agrietada.
¡Peligro de incendio! No efectúe
controles en la instalación de encendido
si la bujía no está ajustada en su asiento.
IMPORTANTE Use solo bujías del tipo
indicado (véase la Tabla de datos técnicos).
87


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alpina AT2 72 HA at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alpina AT2 72 HA in the language / languages: All languages as an attachment in your email.

The manual is 7,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info