Manual Alpina AT2 66 QA (page 68 of 117) (English, German, Dutch, French, Italian)

731509

Zoom out

Zoom in

1/117

EN - 12

Hydrostatic transmission





pedal ac-



WARNING! When cutting on sloping

ground, the forward speed must be re-

duced to ensure safe conditions (see 1A-

C7-8-9).

















5.4.6 Emptying the grass catcher

(Fig. 5.10)

NOTE The emptying of the grass catcher can

only be done with the cutting means disengaged,

otherwise the engine stops.







channel.



 

 

– shift into neutral (N) (see 4.12 – Mechanical

-



 

– hold onto the rear handle (1) and tip up the



5.4.7 Unblocking the collector channel

-





 -



 

 



WARNING! This job must only be per-

formed with the engine turned off.

5.4.8 End of mowing





-



5.4.9 End of work







When the engine has stopped, close the fuel



WARNING! To avoid backfire, put the

accelerator in the «SLOW» position for 20

seconds before stopping the engine.

IMPORTANT To keep the battery charged,

do not leave the ignition key in the «ON» position

when the engine is not running.

5.4.10 Cleaning the machine













electronic circuit board located under the seat.

IMPORTANT Never use hose-nozzles or

harsh detergents for cleaning the body and en-

gine!

WARNING! Do not let debris and dried

grass accumulate in the upper part of the

cutting-means assembly in order to maintain

maximum machine efficiency and safety

levels.

-



or debris.

WARNING! Wear eye protection and

keep people or animals away from the sur-

rounding area when cleaning the cutting-

means assembly.

a) 





 -



5.3.4);

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Alpina AT2 66 QA in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 3,43 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Alpina AT2 66 QA Manual

Product: