Manual Alpina AT2 66 QA (page 62 of 117) (English, German, Dutch, French, Italian)

731509

Zoom out

Zoom in

1/117

EN - 6







31. Warning: Read the instructions before op-



32. Warning: 

-



33. Danger! 



34. Danger! Machine rollover: Do not use this



35. Danger! Dismemberment:





36. Danger of cutting yourself: Cutting



near or under the opening of the cutting



NOTE The images corresponding to the texts

in chapters 3 et seq., can be found on pages iii et

seq. of this manual.

3. UNPACKING AND ASSEMBLY

-



-



IMPORTANT The machine is supplied without

engine oil or fuel. Before starting up the engine,

fill with oil and fuel following the instructions given

in the engine manual.

WARNING! Unpacking and completing

the assembly should be done on a flat and

stable surface, with enough space for mov-

ing the machine and its packaging, always

making use of suitable equipment.

3.1 UNPACKING











 

– dashboard cover;

 

 

– the seat;

 -

tension;

 

 

 -

vided);

– the side discharge chute (if provided);

 

-

rate bags for each use);

   

   

   -



   -



NOTE To avoid damaging the cutting-means

assembly when getting the machine down from

the pallet, take it to the maximum height and be

very careful.

Hydrostatic transmission:

 

-

engage lever should be put in position «B»

(see 4.23).

-



3.2 MOUNTING THE REAR PLATE

(Fig. 3.1)

 









correct right and left positions.



-



Hydrostatic transmission

 







3.3 FITTING THE DASHBOARD AND

STEERING WHEEL (Fig. 3.2)

• 









the caster seat.



hole in the caster (3).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Alpina AT2 66 QA in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 3,43 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Alpina AT2 66 QA Manual

Product: