732013
18
Zoom out
Zoom in
Previous page
1/23
Next page
MAINTENANCE AND STORAGE 13
EN
close the tank cap and operate the machine until
all the cleanser runs out.
Remember to ll with oil, before using the machine
again.
8. BAR MAINTENANCE (Fig. 21)
To avoid asymmetrical wear on the bar, make sure
it is turned over periodically.
To keep the bar in perfect working order, proceed
as follows:
Grease the bearings on the nose sprocket (if
pre sent) with the syringe.
Clean the bar groove with the scraper.
– Clean the lubrication holes.
With a at le, remove burr from the edges and
level o the guides.
Replace the bar whenever:
the groove is not as deep as the height of the
drive links (which must never touch the bottom);
the inside of the guide is worn enough to make
the chain lean to one side.
9. ELECTRIC CABLES
WARNING! Check the condition of the
electric cables regularly and replace them if
they are worn or their insulation looks dam-
aged.
If the machine’s power cable is damaged, it can
only be replaced with an original spare part by your
dealer or an authorised service centre.
10. EXTRAORDINARY MAINTENANCE
All maintenance operations not foreseen in this
ma nual must be performed exclusively by your
dealer.
All and any operations performed in unauthori sed
centres or by unqualied persons will totally invali-
date the warranty.
11. STORAGE
The machine must be stored in a dry place away
from the elements and with the bar cover correctly
tted.
IMPORTANT
Carefully reading the infor-
mation in this Manual provides good machine no-
tions and the guide allows you to identify and face
the most common operating situations. For any
other diculty or problem, please contact an Au-
thorised Service Centre.
The machine does not start:
make sure there is current in the socket;
check that the power cable and extension lead
are intact.
The chain does not turn:
make sure that the front guard is positioned fa-
cing backwards.
The oil does not ow:
make sure there is oil in the tank and ush it if
necessary ( 8.7).
Sparks form:
contact your Dealer for an inspection of the mo-
tor and brushes.
9. TROUBLESHOOTING
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alpina ACS 2.0 ET at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alpina ACS 2.0 ET in the language / languages: All languages as an attachment in your email.

The manual is 1,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info